Note :
●During Clip Review, only the [CANCEL] and [REC] buttons are enabled. Press the [CANCEL] button to cancel clip review and return to ASTBYB (recording standby) mode. Press the [REC] button to cancel clip review and enter recording mode. It will take some time to start recording after the button is pressed.
●When the last clip is less than 5 seconds, the whole clip is played back.
●Only video clips in the currently selected slot can be reviewed.
●When there are no clips in the selected slot, Clip Review function is disabled.
●Clip Review is unavailable when Clip Continuous REC is paused (STBYC , red text) . To operate Clip Review, use the [CANCEL] button to set to ASTBYCB (white text) first.
●Clip Review is unavailable when the camera recorder is connected to an external equipment and the equipment is in recording state.
Assigning Functions to User Buttons
You can assign functions to the [USER1], [USER2], and [USER3] buttons.
By assigning functions to the [USER1], [USER2], and [USER3] buttons, the usability of the camera recorder is enhanced.
[USER1], [USER2], [USER3]
Buttons
1 Assign functions to the [USER1], [USER2], and [USER3] buttons from the menu. (A Page 74)
Set each of the [USER1], [USER2], and [USER3] items in the [Main Menu]B[Camera Function]B[Switch Set...] menu.
Memo :
●Operations of the [USER1], [USER2], and [USER3] buttons are interlocked with the menu settings.
●When the menu screen is displayed, these buttons function as the menu operation buttons. ( A Page 66 [Basic Operations in Menu Screen])
53