Setting Spot Meter (continued)

When [Manual] is selected

A[SPOT METER FIXED] is displayed when the switch is flipped. The brightness of the cursor position is displayed.

Cursor (Green)

[

Viewing Recorded Videos Immediately (Clip Review)

You can check (review) the last recorded video clip on the screen.

However, the video clip cannot be played back if the settings of the camera recorder are different from the video format (Camera Resolution/Frame & Bit Rate) of the clip.

(A Page 71)

Memo :

●To use this function, assign AClip ReviewB to any of the [USER1], [USER2], [USER3] buttons or the [RET] button on the lens.

*[Main Menu]B[Camera Function]B[Switch Set...]B[LENS RET]/[USER1]/[USER2]/[USER3]BAClip

ReviewB(A Page 74)

B [SPOT METER OFF] is displayed when the switch is flipped. Displays of cursors and brightness disappear.

[RET] Button

RET

T

A

 

M

IRIS

 

C[SPOT METER SELECT] is displayed when the switch is flipped. The cursor blinks in red.

Move the cursor with the cross-shaped button to specify the position to display the brightness. When the position is decided, press the Set button or flip the switch to confirm.

Cursor (Blinks in red)

DReturns to the state in A.

Memo :

●When moving the cursor position, [SHUTTER]/[AE LEVEL] control is disabled.

●You can also decide the position of the cursor with the cross- shaped button (Set button).

●When the brightness is 0 % in the entire screen, the frame is fixed in the center.

1 Press the button assigned with the AClip ReviewB function during standby (ASTBYB is displayed).

Playback of the configured section starts.

Memo :

●The video clip is played back according to the [Clip Review] settings in the [Camera Function] menu. By default setting (Last 5 sec), the last 5 seconds of the clip is played back. (A Page 74)

●When playback is complete, the camera recorder exits Clip Review and returns to ASTBYB (recording standby) mode.

52