Setting Time Code and User’s Bit
Time code and user’s bit data are recorded with the video in this camera recorder.
The time code and user’s bit are displayed on the viewfinder and LCD screens during playback or recording. (Status screen)
Displaying Time Code and User’s BitThe time code and user’s bit are displayed on the viewfinder and LCD screens during playback or recording.
The display differs according to the menu settings.
1 Set [Main Menu]B[LCD/VF]B[Status Display...]B[TC/ UB] to AOnB. (A Page 85)
Time code or user’s bit data is displayed on the status screen.
|
|
|
| Time Code or User’s Bit | |||
|
|
|
|
|
|
|
|
1280x720 | 30/24 fps |
|
| 0 0 : 0 0 : 0 0 : 0 0 |
| ||
24p HQ |
|
|
|
|
|
|
|
|
|
|
|
|
| MAX 123% |
|
|
|
|
|
|
| MIN 45% |
|
|
|
|
|
|
| SKIN AREA |
|
A 100min |
|
|
|
|
| S.DTL |
|
|
|
|
|
| B |
| |
B 100min |
|
|
|
| ND1/16 A<3200K> |
| |
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
| |||
STBY |
| 282min |
|
|
|
| |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
STATUS 1 Screen
2 Select the display with the [TC DISPLAY] switch on the LCD monitor.
Select time code display (TC) or user’s bit display (UB).
[TC DISPLAY]
Setting Switch
[TC GENE.] Setting Switch
Memo :
●The
●Time code display for [IEEE1394] input is not supported.
●Values recorded on the SDHC card is displayed in Media mode.
Setting | Display | LCD/VF Display | VIDEO Output | |
Display | ||||
|
|
| ||
TC | Time | When [Main Menu]B[LCD/ | When [Analog Out | |
| Code | VF]B[Status Display...]B[TC/ | Char.] or [SDI Out | |
|
| UB] is set to AOnB, time code | Char.] in the [A/V | |
UB | User’s Bit | |||
|
| or user’s bit is displayed | Out] menu is set to | |
|
| during the following status | AOnB, time code or | |
|
| display and information | user’s bit is | |
|
| display mode of the LCD | displayed in the | |
|
| screen. | respective video | |
|
| STATUS 1 Screen in | output images | |
|
| during the LCD/VF | ||
|
| Camera mode | ||
|
| display setting on | ||
|
| STATUS 1, STATUS 2 | ||
|
| the left. | ||
|
| Screens in Media mode (SD) | ||
|
|
|
|
Three types of time code operation can be selected with the [TC GENE.] switch. They are AFREEB, ARECB, and
AREGENB.
Setting | Mode | Description |
FREE | FreeRun | The time code operates in the run mode at |
| mode | all times regardless of the recording status. |
|
| It continues to run even when the power of |
|
| the camera recorder is turned off. * |
|
|
|
REC | RecRun | The time code operates in the run mode |
| mode | during recording. It continues to run in the |
|
| order of the recorded clips as long as the |
|
| SDHC card is not replaced. If the SDHC |
|
| card is removed and recording is made on |
|
| another card, time code will be recorded on |
|
| the new card from where it was left off in the |
|
| previous card. |
|
|
|
REGEN | Regen | The time code operates in the run mode |
| mode | during recording. When the SDHC card is |
|
| replaced, the last time code recorded on the |
|
| card is read and recorded on a new card so |
|
| that the time code continues in running |
|
| |
|
|
|
*When [Rec Mode] in the [Record Set] menu is set to AVariable FrameB, time code operation enters RecRun mode.
46