Setting the Clock (Initial Setting) (continued)

Changing the Display Style

You can change the display style of the date/time on the menu.

Memo :

●To perform the settings while looking at the monitor screen connected to the video signal output terminal, set [Analog Out Char.] or [SDI Out Char.] in the [A/V Out] menu to AOnB. (A Page 86)

Setting the date style (Date Style) (A Page 85)

ASelect [LCD/VF]B[Status Display...]B[Date/Time].

BSelect the date display style.

[Setting values: YMD (year, month, day), MDY (month, day, year), DMY (day, month, year)]

CPress the Set button.

Setting the time style (Time Style) (A Page 85)

ASelect [LCD/VF]B[Status Display...]B[Time Style].

BSelect the time display style.

[Setting values: 12hour (12 hour display), 24hour (24 hour display)]

CPress the Set button.

Date/Time Display in Different Operation Modes

During Camera Mode

Date/time of the built-in clock is

 

displayed.

 

 

During Media Mode

Shooting date/time of the clip being

(SD Card Mode)

played back is displayed.

 

 

During Media Mode

Date/time is not displayed.

(IEEE1394 Mode)

 

 

 

Adjusting the Monitor Speaker

The monitor speaker can be rotated 180 degrees. Adjust according to the position of your ear.

180 Degrees Rotation

Monitor

Speaker

[MONITOR] Level Adjustment Knob

Memo :

●Adjust the volume of the monitor speaker with the [MONITOR] level adjustment knob at the side control panel on the right of the camera recorder. Various warning alarm tones may also be output repeatedly. (A Page 120)

Note :

●The rotation angle of the monitor speaker is 180 degrees. Do not over-rotate the monitor speaker.

26