SDHC Cards
This camera recorder saves the recorded images and audio sound on the SDHC card (sold separately) in the card slot.
Memo :
●If the SDHC card contains files recorded by devices other than this camera recorder or files that are saved from a PC, the recordable time may be shorter or data may not be properly recorded.
SDHC Cards to UseUse a Class 6 SDHC card (4 GB - 32 GB).
Note :
●Using cards other than those from Panasonic, TOSHIBA or SanDisk may result in recording failure or data loss.
SDHC Card Cover Knob | Slot B Status Indicator |
Slot A Status | SDHC |
Indicator | Card |
| Cover |
[SLOT
SELECT] Button
Inserting an SDHC CardThis camera recorder comes with two card slots for video/ audio recording and playback (Slot A and B).
1 Slide the SDHC card cover knob of the desired slot in the direction of the arrow and open the cover.
2 Insert an SDHC card with the notched corner first.
3 Close the SDHC card cover.
1 |
|
| Notched Corner |
| SDHC Card |
3 | 2 |
|
The following table shows the respective states of slot A and B.
Lamp | Slot Status |
|
Lights up in red | Inserted SDHC card is being accessed. |
|
| (writing/reading data) |
|
| Do not turn off the power of the camera |
|
| recorder or remove the SDHC card. |
|
|
|
|
Lights up in green | On standby. Inserted SDHC card can be |
|
| used for recording or playback. |
|
|
|
|
Light goes out | ● SDHC card is not inserted. |
|
| ● An unusable card is inserted. |
|
| ● An SDHC card is inserted but a different |
|
| slot is selected. |
|
|
|
|
|
|
|
|
|
|
1 Check that the SDHC card to be removed is not being accessed (lights up in red).
2 Slide the SDHC card cover knob in the direction of the arrow and open the cover.
3 Push the SDHC card and remove it from the slot.
4 Close the SDHC card cover.
2 
3
4 
Memo :
●When both slots are inserted with usable SDHC cards, the previously selected slot is used.
Note :
●Data may be lost if you turn off the power of the camera recorder or remove the SDHC card when it is being accessed. All data recorded on the card, including the file that is being accessed, may be corrupted. Be sure to check whether the status indicator is lighted in green or not before you turn off the power or remove the SDHC card.
●If you mistakenly remove the card when it is being accessed, reinsert the card only after the status indicator goes off.
●The SDHC card may not be recognized if you insert and remove the card within a short time. When this happens, remove the card and wait for a few seconds before you reinsert.
31