Power Status DisplayViewfinder and LCD Monitor Screens

The power status is displayed on the status and menu screens. If the battery or supplied voltage from the AC adapter is low, a warning will be displayed in red.

Note :

If the battery in use is not a recommended one, the battery mark which indicates the battery level may not appear.

Status screen

( A Page 90 [Status Screen in Camera Mode]) ( A Page 96 [Status Screen in SD Card Mode]) ( A Page 98 [Status Screen in 1394 Mode])

1280x720

30/24 fps

 

 

0 0 : 0 0 : 0 0 : 0 0

 

 

24p HQ

 

 

 

 

 

MAX 123%

 

 

 

 

 

 

 

 

 

 

 

 

MIN 45%

 

 

 

 

 

 

SKIN AREA

 

 

 

 

 

 

S.DTL

A 100min

 

 

 

 

 

B -3

B 100min

 

 

 

 

ND1/16 A<3200K>

STBY

 

 

RES

F5.6 AE+1 9dB 1/10000

 

 

 

 

 

 

 

 

 

Enlarged status display on the LCD monitor (A Page 99)

CH1

CH2

DF

FREE

STBY

A

1280 x 720

 

 

 

 

min 24p HQ

 

 

 

 

 

 

 

 

 

B 100 min

 

RES

Menu screen (A Page 66)

Warnings by Lamps and Alarm Tones

Warning status is indicated by tally lamps and alarm tones.

The front and back tally lamps of the camera recorder blink.

Alarm tone is output from the monitor speaker or [PHONES] terminal.

Memo :

If you continue to use the camera recorder while the power warning is displayed, the camera recorder will stop automatically when the battery or supplied voltage from the AC adapter becomes lower.

Note :

The remaining battery power and time are displayed as there are from the battery information. Accurate data may not be displayed according to the battery condition. Replace the battery as soon as possible when the remaining battery power and time are low.

Precautions for Batteries

Store the battery in a cool and dry place when not in use. Do not expose the battery to high temperatures (such as in a car under direct sunlight). This will cause battery leakage and shortens the battery life.

Operating time is shortened if the battery terminal is dirty.

If the operating time shortens drastically even after charging, the battery may be reaching the end of its life. Replace the battery with a new one.

Charging

Use up the charge completely before you charge the battery. If the battery is not fully discharged before charging, the battery capacity may drop after repeated cycles.

If the battery capacity drops due to repetitive shallow charging and discharging, it may be recovered by using up the charge completely and then fully charging the battery again.

If you charge the battery immediately after using while the battery is still warm, it may not be fully charged.

It is recommended to charge the battery in an environment between 10 I and 35 I. The battery may not be fully charged or the charging time may be prolonged if charged under low temperatures (below 10 I).

23