Adjusting the LCD Monitor and Viewfinder

Adjusting the LCD Monitor

You can change the angle and brightness of the LCD monitor screen according to your usage condition.

Changing the brightness of the screen will not affect the recorded images.

[LCD BRIGHT +/-] Button

LCD Lock Release Knob

1

2

Tilt 180 degrees

upward

Tilt 90 degrees

downward

[LCD PEAKING +/-] Button

 

Adjusting the Angle of the LCD Monitor

1 Slide the LCD lock release knob to open the LCD monitor.

2 Rotate the LCD monitor to adjust the angle.

●While the LCD monitor is open, you can rotate it 180 degrees upward or 90 degrees downward.

●Rotating the LCD monitor 180 degrees upward enables you to see the screen from the lens side.

Select [Main Menu]B[LCD/VF]B

Set [LCD Mirror Mode] to AMirrorBB Set button (A Page 82)

Adjusting the LCD Monitor Screen

Adjusting contour and brightness

●Use the [LCD BRIGHT +/-] button to adjust the brightness of the LCD monitor screen. Press the [+] and [-] buttons simultaneously to return to standard settings.

[+]

:

Press this button to brighten the screen.

[-]

:

Press this button to darken the screen.

●During adjustment, the brightness level is displayed on the LCD monitor screen.

●During Camera mode, SD Card mode (playback), or IEEE1394 mode

●During SD Card mode (thumbnail), menu operation, or USB mode

●Use the [LCD PEAKING +/-] button to adjust the contour of the LCD monitor screen. Press the [+] and [-] buttons simultaneously to return to standard settings.

[+]

:

Press the button to increase contour correction.

[-]

:

Press the button to decrease contour correction.

●During adjustment, the contour level is displayed on the LCD monitor screen. ( A Page 28 [Adjusting contour and brightness])

●During Camera mode, SD Card mode (playback), or IEEE1394 mode

●During SD Card mode (thumbnail), menu operation, or USB mode

Adjusting the Viewfinder

You can change the brightness and peaking of the viewfinder screen according to your usage conditions.

Changing the brightness of the screen will not affect the recorded images.

[VF PEAKING] Knob

[VF BRIGHT] Knob

Eyepiece Focus Ring

Eyepiece

Slide Lock Ring

Eyepiece

Lock Ring

Note :

●A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images when you blink your eyes. This is not a malfunction. It does not affect the recorded images, SDI output, or component output.

28