Setting Zebra Pattern
When the luminance level range for displaying zebra patterns is specified, diagonal lines (zebra pattern) are displayed at areas with the specified luminance levels during shooting.
Specifying the Brightness (Luminance) Level Range for Displaying Zebra Pattern[ZEBRA ON/OFF] Switch
Specify the upper (Top1, Top2) and lower (Bottom1, Bottom2) limits of the luminance level.
1 Set the zebra display pattern.
●Select the display pattern in [LCD/VF]B[Shooting Assist...]B[Zebra].
Memo :
●ATop2B and ABottom2B cannot be set if [Zebra] is set to A1PatternB.
●When the specified range of two zebra patterns overlaps, the two zebra patterns overlap and are displayed in a grid.
3 Display the zebra pattern.
Set the [ZEBRA ON/OFF] switch in front of the camera recorder to AONB to display the zebra pattern at the specified range.
Zebra Pattern
[Zebra1] Display | [Zebra2] Display |
|
2 Specify the brightness (luminance) level range for displaying zebra pattern.
Specify the upper (Top1, Top2) and lower (Bottom1, Bottom2) limits of the luminance level in [LCD/ VF]B[Shooting Assist...]B[Zebra].
Item | Settings | Options |
Zebra | Zebra display pattern | 1Pattern |
|
| 2Patterns |
|
|
|
Top1 | Upper luminance limit for | 5 % - 100 %, Over (in 5 |
| displaying [Zebra1] | % increments) |
|
|
|
Bottom1 | Lower luminance limit for | 0 % - 100 % (in 5 % |
| displaying [Zebra1] | increments) |
|
|
|
Top2 | Upper luminance limit for | 5 % - 100 %, Over (in 5 |
| displaying [Zebra2] | % increments) |
|
|
|
Bottom2 | Lower luminance limit for | 0 % - 100 % (in 5 % |
| displaying [Zebra2] | increments) |
|
|
|
50