Preparations

Attaching Accessories

Attaching the Zoom Lens

(Supplied with GY-HM700U/GY-HM700E only)

Hole

 

 

1

3

Pin

 

2

Clamp4

1 Loosen the mount ring.

2 Attach the zoom lens such that the pin matches the hole of the mounting area.

3 Tighten the mount ring.

4 Connect the cable connector.

5 Attach the lens cable to the clamp.

Memo :

●Tighten the mount ring completely. If it is not fully tightened, the lens may drop or the back focus may be out of alignment.

●When attaching or removing the zoom lens, set the [POWER] switch of the camera recorder to AOFFB.

Attaching the Microphone (Supplied)

You can attach the supplied microphone to the microphone holder.

The supplied microphone has a phantom power supply.

1 Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder.

2 Place the microphone in the microphone holder.

3 Turn the knob on the microphone holder clockwise to secure the microphone.

4 Connect the microphone cable to the [INPUT1] or [INPUT2] terminal.

5 Pin the microphone cable to the clamp.

6 Make sure to perform the correct settings for the phantom microphone (A Page 44).

Knob

Microphone

Microphone Holder

Clamp

[INPUT1/INPUT2] Terminal

19