INSTALLATION (IN-DASH MOUNTING)

 

INSTALLATION (MONTAGE DANS LE TABLEAU DE BORD)

The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits.

• If you are not sure how to install this unit correctly, have it installed by a qualified technician.

*1 When you stand the unit, be careful not to damage the fuse on the rear.

*1 Lorsque vous mettez l’appareil à la verticale, faire attention de ne pas endommager le fusible situé sur l’arrière.

L’illustration suivante est un exemple d’installation typique. Si vous avez des questions ou avez besoin d’information sur des kits d’installation, consulter votre revendeur d’autoradios JVC ou une compagnie d’approvisionnement.

•Si l’on n’est pas sûr de pouvoir installer correctement cet appareil, le faire installer par un technicien qualifié.

Do the required electrical connections.

Réalisez les connexions électriques.

Bend the appropriate tabs to hold the sleeve firmly in place.

Tordez les languettes appropriées pour maintenir le manchon en place.

Removing the unit

Before removing the unit, release the rear section.

Retrait de l’appareil

Avant de retirer l’appareil, libérer la section arrière.

Insert the two handles, then pull them as illustrated so that the unit can be removed. Insérez les deux poignées, puis tirez de la façon illustrée de façon à retirer l’appareil.

When using the optional stay / Lors de l’utilisation du hauban en option

Fire wall

Stay (option)

Cloison

Hauban (en option)

When installing the unit without using the sleeve / Lors de l’installation de l’appareil scans utiliser de manchon

In a Toyota car for example, first remove the car radio and install the unit in its place.

Dans une voiture Toyota, par exemple, retirez d’abord l’autoradio et installez l’appareil à sa place.

Dashboard

Tableau de bord

Screw (option)

Vis (en option)

Flat type screws (M5 ⋅ 8 mm)*2

Vis à tête plate (M5 ⋅ 8 mm)*2

Bracket*2

Support*2

*2 Not supplied for this unit.

*2 Non fourni avec cet autoradio.

Flat type screws (M5 ⋅ 8 mm)*2 Vis à tête plate (M5 ⋅ 8 mm)*2

Pocket

Poche

Bracket*2

Support*2

Install the unit at an angle of less than 30˚. Installez l’appareil avec un angle de moins de 30˚.

Note

: When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws are

 

used, they could damage the unit.

Remarque

: Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une longueur de 8 mm.

 

Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.

TROUBLESHOOTING

• The fuse blows.

*Are the red and black leads connected correctly?

•Power cannot be turned on. * Is the yellow lead connected?

•No sound from the speakers.

*Is the speaker output lead short-circuited?

• Sound is distorted.

*Is the speaker output lead grounded?

*Are the “–” terminals of L and R speakers grounded in common?

• Noise interfere with sounds.

*Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

• This unit becomes hot.

*Is the speaker output lead grounded?

*Are the “–” terminals of L and R speakers grounded in common?

•This unit does not work at all. * Have you reset your unit?

EN CAS DE DIFFICULTES

• Le fusible saute.

*Les fils rouge et noir sont-ils racordés correctement?

•L’appareil ne peut pas être mise sous tension. * Le fil jaune est-elle raccordée?

•Pas de son des enceintes.

*Le fil de sortie d’enceinte est-il court-circuité?

• Le son est déformé.

*Le fil de sortie d’enceinte est-il à la masse?

*Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble à la masse?

• Interférence avec les sons.

*La prise arrière de mise à la terre est-elle connectée au châssis de la voiture avec un cordon court et épais?

• L’appareil devient chaud.

*Le fil de sortie d’enceinte est-il à la masse?

*Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble à la masse?

•Cet appareil ne fonctionne pas du tout. * Avez-vous réinitialisé votre appareil?

2

Page 185 Page 187
Page 186
Image 186
JVC KD-AR770, KD-G720 manual Installation Montage Dans LE Tableau DE Bord, Remarque
Page 185 Page 187

KD-G720, KD-AR770 specifications

The JVC KD-AR770 and KD-G720 are two prominent car audio receivers that exemplify JVC's commitment to delivering high-quality sound and advanced features for automotive enthusiasts. With their cutting-edge technology and user-friendly design, these models cater to a wide range of audio preferences and requirements.

The JVC KD-AR770 stands out with its sleek appearance and intuitive interface. One of its main features is the ability to connect to various audio sources, including USB ports for direct playback from flash drives, as well as Bluetooth connectivity for wireless streaming. This allows users to enjoy their favorite music from smartphones and other compatible devices effortlessly. Additionally, the built-in amplifier delivers a powerful output, ensuring that every note is crisp and clear.

Equipped with a comprehensive equalizer, the KD-AR770 allows users to customize their sound experience. This feature enables them to adjust frequency levels for bass, mid, and treble, creating a tailored audio profile that suits individual preferences. The receiver also supports various audio formats, including MP3 and WAV files, ensuring versatility for music lovers.

On the other hand, the JVC KD-G720 shares many similarities with the KD-AR770 but adds its own unique features. With a vibrant LCD display, the KD-G720 enhances usability with easy navigation through menus, making it accessible for all users. Like its counterpart, it supports multiple audio sources, including CD playback and iPod connectivity, enabling users to enjoy a variety of listening options.

Both models feature high-quality sound enhancement technologies, such as JVC's Digital Sound Processing (DSP), which enhances the overall audio output, providing an immersive listening experience. The receivers also include programmable presets, allowing users to store their favorite radio stations for quick access.

Another notable characteristic of both the KD-AR770 and KD-G720 is their user-friendly controls. The layout of buttons and knobs is designed for ease of use, ensuring that drivers can adjust settings safely while on the road. Furthermore, each model has compatibility with various vehicle systems, making installation straightforward.

In summary, the JVC KD-AR770 and KD-G720 are impressive car audio receivers designed for those who seek quality sound and convenience. Their array of features, from Bluetooth connectivity to customizable sound settings, combined with user-friendly interfaces, makes them ideal choices for enhancing any vehicle's audio system. With these receivers, drivers can enjoy a richer, more engaging listening experience miles down the road.
Top Page Image Contents