ENGLISH

FRANÇAIS

ELECTRICAL CONNECTIONS

RACCORDEMENTS ELECTRIQUES

 

 

 

AIf your car is equipped with the ISO connector / Si votre voiture est équippée d’un connecteur ISO

Connect the ISO connectors as illustrated.

Connectez les connecteurs ISO comme montré sur l’illustration.

From the car body De la carrosserie de la voiture

ISO connector of the supplied power cord Connecteur ISO pour le cordon d’alimentation fourni

View from the lead side

Vue à partir du côté des fils

For some VW/Audi or Opel (Vauxhall) automobile / Pour certaine voiture VW/Audi ou Opel (Vauxhall)

You may need to modify the wiring of the supplied power cord as illustrated.

• Contact your authorized car dealer before installing this unit.

Vous aurrez peut-être besoin de modifier le câblage du cordon d’alimentation fourni comme montré sur l’illustration.

Contactez votre revendeur automobile autorisé avant d’installer l’appareil.

Original wiring / Câblage original

Modified wiring 1 / Câblage modifié 1

 

 

 

 

ISO connector

Connecteur ISO

Use modified wiring 2 if the unit does not turn on.

Utilisez le câblage modifié 2 si l’appareil ne se met pas sous tension.

Modified wiring 2 / Câblage modifié 2

Y: Yellow

R: Red

Jaune

Rouge

BConnections without using the ISO connectors / Connexions sans l’utilisation des connecteurs ISO

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.

The leads of the power cord and those of the connector from the car body may be different in color.

1Cut the ISO connector.

2Connect the colored leads of the power cord in the order specified in the illustration below.

3Connect the aerial cord.

4Finally connect the wiring harness to the unit.

Avant de commencer la connexion: Vérifiez attentivement le câblage du véhicule. Une connexion incorrecte peut endommager sérieusement l’appareil.

Le fil du cordon d’alimentation et ceux des connecteurs du châssis de la voiture peuvent être différents en couleur.

1Coupez le connecteur ISO.

2Connectez les fils colorés du cordon d’alimentation dans l’ordre spécifié sur l’illustration ci-dessous.

3Connectez le cordon d’antenne.

4Finalement, connectez le faisceau de fils à l’appareil.

To subwoofer (see diagram )

Aerial connector Au caisson de grave (voir le diagramme ) Connecteur d’antenne

To steering wheel remote controller (see diagram ) Pour la télécommande de volant (voir le diagramme )

15 A fuse Fusible 15 A

Rear ground terminal Borne arrière de masse

Line out (see diagram ) Sortie de ligne

(voir le diagramme )

Black

Noir

*1 Not supplied for this unit.

*1 Non fourni avec cet autoradio.

To metallic body or chassis of the car

Vers corps métallique ou châssis de la voiture

Ignition switch Interrupteur d’allumage

Yellow *2

To external components (see diagram )

Au appareils extérieurs (voir le diagramme )

*2 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.

Jaune *2

Red

Rouge

To a live terminal in the fuse block connecting to the car battery (bypassing the ignition switch) (constant 12 V)

Àune borne sous tension du porte-fusible connectée à la batterie de la voiture (en dérivant l’interrupteur d’allumage) (12 V constant)

To an accessory terminal in the fuse block

Vers borne accessoire du porte-fusible

Fuse block Porte-fusible

*2 Pour vérifier le fonctionnement de cet appareil avant installation, ce fil doit être raccordé, sinon l’appareil ne peut pas être mis sous tension.

Blue with white stripe Bleu avec bande blanche

Orange with white stripe Orange avec bande blanche

Brown

Marron

To the remote lead of other equipment or power aerial if any (200 mA max.)

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une (200 mA max.)

To car light control switch

À l’interrupteur d’éclairage de la voiture

To cellular phone system

À un système de téléphone cellulaire

White with black stripe

 

 

 

 

 

White

Gray with black stripe

 

 

 

 

 

Gray

Green with black stripe

 

 

 

 

 

Green

Purple with black stripe

 

 

 

 

 

Purple

Blanc avec bande noire

 

 

 

 

Blanc

Gris avec bande noire

 

 

 

 

Gris

Vert avec bande noire

 

 

 

 

 

Vert

Violet avec bande noire

 

 

 

 

 

Violet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

Enceinte gauche (avant)

Enceinte droit (avant)

Enceinte gauche (arrière)

Enceinte droit (arrière)

3

Page 187
Image 187
JVC KD-G720, KD-AR770 manual Electrical Connections Raccordements Electriques

KD-G720, KD-AR770 specifications

The JVC KD-AR770 and KD-G720 are two prominent car audio receivers that exemplify JVC's commitment to delivering high-quality sound and advanced features for automotive enthusiasts. With their cutting-edge technology and user-friendly design, these models cater to a wide range of audio preferences and requirements.

The JVC KD-AR770 stands out with its sleek appearance and intuitive interface. One of its main features is the ability to connect to various audio sources, including USB ports for direct playback from flash drives, as well as Bluetooth connectivity for wireless streaming. This allows users to enjoy their favorite music from smartphones and other compatible devices effortlessly. Additionally, the built-in amplifier delivers a powerful output, ensuring that every note is crisp and clear.

Equipped with a comprehensive equalizer, the KD-AR770 allows users to customize their sound experience. This feature enables them to adjust frequency levels for bass, mid, and treble, creating a tailored audio profile that suits individual preferences. The receiver also supports various audio formats, including MP3 and WAV files, ensuring versatility for music lovers.

On the other hand, the JVC KD-G720 shares many similarities with the KD-AR770 but adds its own unique features. With a vibrant LCD display, the KD-G720 enhances usability with easy navigation through menus, making it accessible for all users. Like its counterpart, it supports multiple audio sources, including CD playback and iPod connectivity, enabling users to enjoy a variety of listening options.

Both models feature high-quality sound enhancement technologies, such as JVC's Digital Sound Processing (DSP), which enhances the overall audio output, providing an immersive listening experience. The receivers also include programmable presets, allowing users to store their favorite radio stations for quick access.

Another notable characteristic of both the KD-AR770 and KD-G720 is their user-friendly controls. The layout of buttons and knobs is designed for ease of use, ensuring that drivers can adjust settings safely while on the road. Furthermore, each model has compatibility with various vehicle systems, making installation straightforward.

In summary, the JVC KD-AR770 and KD-G720 are impressive car audio receivers designed for those who seek quality sound and convenience. Their array of features, from Bluetooth connectivity to customizable sound settings, combined with user-friendly interfaces, makes them ideal choices for enhancing any vehicle's audio system. With these receivers, drivers can enjoy a richer, more engaging listening experience miles down the road.