Playing from a USB memory

This unit can play MP3/WMA tracks stored in a USB memory.

All tracks in the USB memory will be played repeatedly until you change the source.

•Removing the USB memory will also stop playback.

~

Ÿ

USB input terminal

USB memory

If a USB memory has been attached...

About MP3 and WMA tracks

MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.”

About the CD changer

It is recommended to use a JVC MP3- compatible CD changer with your unit.

•You can also connect MP3-incompatible CD changers. However, these units are not compatible with MP3 discs.

•You cannot use the CH-X99, CH-X100, and KD-MK series CD changers with this unit.

•You cannot play any WMA disc in the CD changer.

•Disc text information recorded in the CD Text can be displayed when a JVC CD Text compatible CD changer is connected.

•For connection, see Installation/Connection Manual (separate volume).

To fast-forward or reverse the track

ENGLISH

To go to the next or previous tracks

Playback starts from where it has been stopped previously.

•If a different USB memory is currently attached, playback starts from the beginning.

To detach the USB memory, straightly pull it out from the unit.

Cautions:

•Avoid using the USB memory if it might hinder your safety driving.

•Make sure all important data has been backed up to avoid losing the data.

Continued on the next page...

9