3. Settings and adjustments for recording (continued)
White shading adjustment
Even if the white balance is successfully achieved in the center of the screen, there may be times when white balance cannot be achieved at the top and bottom of the screen, resulting in the color of green and magenta becoming discolored. This is due to the characteristic of the lens and the adjustment of this is called the white shading adjustment.
Perform the following after adjusting the white balance.
MENU DOWN
@ @ @ @ @ @
SET
SCSI
SEND AW/SEL MODE | REC | REC LED |
|
MENU UP DOWN SET
PLAY
FREEZE
MONITOR 
LENS
REMOTE | DC IN |
ON 1 2 3 4 | POWER |
SEE INSTRUCTION MANUAL
- -
1 : EXPOSURE . .
2 : WH I TE BA L ANCE . .
3 : FREEZE . .
4 : PROCESS . .
5 : SYSTEM SET T I NG . .
1. Press the MODE button to enter the REC mode (REC LED on), then press and hold the MENU button for at least 2 seconds to display the REC MENU screen.
(If the button is pressed for less than 2 seconds, the REC mode quick menu will appear. ☞ Page 38)
2. Press the DOWN button, select 2. WHITE BALANCE (the text will be displayed in purple when selected), then press the SET button.
The WHITE BALANCE screen will appear.
3. Press the UP/DOWN and SET buttons to set SHAD- ING MODE in the WHITE BALANCE screen to ADJUST. The set value will be displayed in purple, indicating that it can be adjusted.
