Part names and their functions, Front and bottom | JVC KY-F70

1. Introduction (continued)

Part names and their functions

[Front and bottom]

@ @ @ @ @ @

C-MOUNT

DIGITAL	CAMERA
	CAMERA
	KY-
	F70

ALens mount

Although the lens mount conforms to the type C mount lens, there are restrictions on the lenses that can be used.

Mounting the lens ( ☞ page 17)

BCamera mounting bracket

Although the mounting bracket is mounted on the bottom of the camera when shipped, the bracket can also be mounted on the top of the camera.

Mounting the camera ( ☞ page 22)

DScrew holes for mounting the camera (1/4-inch)

Used when mounting the camera to a fixer or rotating platform.

ELithium battery case

Used to case the lithium battery for time and date backup. The lithium battery is not installed when shipped.

Please install the attached lithium battery (CR2032) before use.

Inserting the lithium battery ( ☞ page 16)

CLocking screws for the camera

mounting bracket (M2.6 × 6mm, 3 units)

CAUTION

Always use the attached screws. Using screws

that exceed 6mm may result in malfunction of the unit.

E8

Image 8

JVC KY-F70 manual Part names and their functions, Front and bottom

Contents

Illustration with optional lens attachment This instruction book is made from 100% recycled paper Safety Precautions Varning Table of Contents Characters and symbols used in this instruction book Memo Introduction FeaturesAccessories and attachments Line and patterns may appear distorted when recorded Phenomena unique to CCD Part names and their functions Front and bottom Rear Ventilation hole E10Mode Used to connect the lens cable Mounting the lens This lamp lights when the power of the main unit is onE11 E12 Explanation of terminalsRemoter terminal Metal 10-pin, female E13 For the power supply, always use the AA-P700 AC adapter Before recordingBasic system E14 E15 AC adapterMO disk drive Model name Adapter Screws InstallE16 Female Lens remote control Mounting the lensE17 Camera head Male Thread section Mount clamp ring Lens Connecting the power Clamp filter Attached power supply cableE18 AC adapter Monitor terminal Connecting a monitorE19 Connecting an MO drive unit E20Scsi Do not set the ID of the MO drive side to other than Connecting a printer Dip switchesE21 Scsi Set the ID of the printer side to other than Mounting the camera Mounting methodChanging the camera mounting bracket position E22 E23 Fall prevention wire chain 6mm Camera headFall prevention E24 Minal on the rear of the main unitSet to OFF Set to on Menu settings VGA mode settingsLens settings VGA mode and lens settings are made from the menu screen Time and date settings Time Adjust screenE26 Play menu screen E27 OK display screen Monitor adjustment Turn the main unit power on Adjust the video monitorSet using the main unit dip switches Monitor settings E28 Press the Menu button to return to the normal screen Focus adjustmentE29 White balance adjustment E30REC Menu screen Menu item Set value White Balance screen Auto white operation completed E31Auto white in operation REC Menu screen White shading adjustmentE32 E33 Basic operations Recording images to the main unit memoryE34 Freeze display Returning to the REC mode Press the Mode button to enter the Play modePlaying back images from the memory E35 Saving images from the memory to an MO disk E36 Set to either the Freeze or Play mode Outputting images from the memory to a printerUse a printer with an Scsi input terminal E37 Video Memory Clear Clearing images from the memoryE38 E39 Memory cleared E40 Various recording methodsRecording a PC monitor E41 System Setting screenOutputting negative images Timing chart Sxga mode Synchronizing flash and FreezeE42 High speed shutter only About ALC and EEI operations E43 E44 Menu screen settingsMenu screen flow E45 Exposure screenFreeze screen Process screen Setting procedure REC normal menu screenE46 REC normal menu screen Menu item Set value About the submenu screens of the normal REC menu Play menu screenREC quick menu screen E47 Exposure screen E48 E49 E50 White Balance screen E51 Mode OFF E52Shading Level G E53 Freeze screenProcess 1/3 screen @ADJUST set when changing the gamma curve E54Gamma Used to set whether the gamma curve to determine Process 2/3 screen E55Flare R Flare B E56 ColorMatrix Standard value System Setting screen E57 E58 Menu screen of the Play mode E59Send Prioryty Video ME.MORY REC mode quick menu screen E60Menu item Tor E61 Sensitivity can be changed using the Level Submenu itemSensitivity can be changed when the sensitivity mode Resetting settings Menu Reset screen SET buttonResetting E62 E63 Press the Menu once more to return to the normal screen Connecting to a PC Camera remote control softwareCompatible systems E64 AC adapter Analog RGB, WEN, Hs, Vs, RS-232C Printer Flash Freeze switchE65 E66 SpecificationsOthers Inch screw External dimensions unit mmE67 SL96172