Focus adjustment, E29 | JVC KY-F70 guide

Focus adjustment

This unit is not equipped with a back-focus feature. Adjust the back focus using the lens.

Male

Focus ring

-F70 KY

CAMERA

DIGITAL

C-MOUNT

Female

	Shutter speed


- - - REC MENU ( QU I CK ) - - -
AE L EVE L	: 0
I R I S L EVE L	: 1 2 8
SHUTERE	: STEP
SHUTERE	: STEP
SPEED	: 1 / 30
SENS I T I V I TY	: STEP
L EVE L	: I SO1 0 0
A LC MAX	: I SO4 0 0

SEND PRI ORIT Y: MO

REC mode quick menu screen

The default setting of the main unit shutter speed is 1/8. When difficult to focus, change the shutter speed to 1/30 using the procedure given below.

1. Press the MODE button to enter the REC mode (REC LED on). Next, lightly press the MENU button to display the REC mode quick menu screen.

2. Press the DOWN and SET buttons to change SHUT- TER to STEP.

3. Press the DOWN button to select SHUTTER SPEED, then press the SET button.

1/8 will be displayed in purple, indicating that it can be changed.

4. Press the UP or DOWN button to change the value to 1/30, then press the SET button. When confirmed, the set value of 1/30 will be displayed in white.

MEMO

At this time, pressing the MENU button without pressing the SET button will not confirm the set value and the unit will re- turn to the setting prior to the change.

5. Press the MENU button to return to the normal screen.

E29

Image 29

JVC KY-F70 manual Focus adjustment, E29, Press the Menu button to return to the normal screen

Contents

This instruction book is made from 100% recycled paper Illustration with optional lens attachment Safety Precautions Varning Table of Contents Memo Characters and symbols used in this instruction book Introduction FeaturesAccessories and attachments Phenomena unique to CCD Line and patterns may appear distorted when recorded Front and bottom Part names and their functions Rear Ventilation hole E10Mode Used to connect the lens cable Mounting the lens This lamp lights when the power of the main unit is onE11 E12 Explanation of terminalsRemoter terminal Metal 10-pin, female E13 Before recording For the power supply, always use the AA-P700 AC adapterBasic system E14 AC adapter E15MO disk drive Model name Adapter Screws InstallE16 Mounting the lens Female Lens remote controlE17 Camera head Male Thread section Mount clamp ring Lens Clamp filter Attached power supply cable Connecting the powerE18 AC adapter Monitor terminal Connecting a monitorE19 E20 Connecting an MO drive unitScsi Do not set the ID of the MO drive side to other than Dip switches Connecting a printerE21 Scsi Set the ID of the printer side to other than Mounting method Mounting the cameraChanging the camera mounting bracket position E22 E23 Fall prevention wire chain 6mm Camera headFall prevention Minal on the rear of the main unit E24Set to OFF Set to on VGA mode settings Menu settingsLens settings VGA mode and lens settings are made from the menu screen Time Adjust screen Time and date settingsE26 Play menu screen OK display screen E27 Turn the main unit power on Adjust the video monitor Monitor adjustmentSet using the main unit dip switches Monitor settings E28 Press the Menu button to return to the normal screen Focus adjustmentE29 E30 White balance adjustmentREC Menu screen Menu item Set value White Balance screen Auto white operation completed E31Auto white in operation REC Menu screen White shading adjustmentE32 E33 Recording images to the main unit memory Basic operationsE34 Freeze display Press the Mode button to enter the Play mode Returning to the REC modePlaying back images from the memory E35 E36 Saving images from the memory to an MO disk Outputting images from the memory to a printer Set to either the Freeze or Play modeUse a printer with an Scsi input terminal E37 Video Memory Clear Clearing images from the memoryE38 Memory cleared E39 E40 Various recording methodsRecording a PC monitor E41 System Setting screenOutputting negative images Synchronizing flash and Freeze Timing chart Sxga modeE42 High speed shutter only E43 About ALC and EEI operations E44 Menu screen settingsMenu screen flow Exposure screen E45Freeze screen Process screen REC normal menu screen Setting procedureE46 REC normal menu screen Menu item Set value Play menu screen About the submenu screens of the normal REC menuREC quick menu screen E47 E48 Exposure screen E49 E50 E51 White Balance screen E52 Mode OFFShading Level G E53 Freeze screenProcess 1/3 screen E54 @ADJUST set when changing the gamma curveGamma Used to set whether the gamma curve to determine E55 Process 2/3 screenFlare R Flare B Color E56Matrix Standard value E57 System Setting screen E58 E59 Menu screen of the Play modeSend Prioryty Video ME.MORY E60 REC mode quick menu screenMenu item Tor E61 Sensitivity can be changed using the Level Submenu itemSensitivity can be changed when the sensitivity mode Menu Reset screen SET button Resetting settingsResetting E62 Press the Menu once more to return to the normal screen E63 Camera remote control software Connecting to a PCCompatible systems E64 AC adapter Analog RGB, WEN, Hs, Vs, RS-232C Printer Flash Freeze switchE65 E66 SpecificationsOthers Inch screw External dimensions unit mmE67 SL96172