Menu item |
| Function/variable range | Default value |
SPEED | MEMO |
|
|
•In areas which the power supply frequency is 50Hz, set- ting the unit to 1/100 can reduce flickering when record- ing under florescent lighting.
•There may be shortage of light when increasing the shut- ter speed. In this case, adjust the iris or sensitivity. Spe- cial attention is required for the picture quality when rais- ing the sensitivity since images may become distorted.
SENSITIVITY | Used to set the sensitivity mode. | STEP | ||
|
| STEP: | the sensitivity can be changed using the LEVEL |
|
|
|
| submenu item. |
|
|
| ALS: | the sensitivity si automatically changed by the |
|
|
|
| brightness. Maximum sensitivity is set in the next |
|
|
|
| ALC MAX menu item. |
|
|
| V.SENS: the sensitivity can be set in detail using the |
| |
|
|
| LEVEL submenu item. |
|
|
|
|
| |
| LEVEL | The sensitivity can be changed when the sensitivity mode | STEP: | |
|
| is set to STEP or V.SENS. | ISO100 | |
|
| [STEP variable range: ISO100, ISO200, ISO400] | V.SENS: | |
|
| [V.SENS variable range: ISO100 ~ ISO400] | ISO100 | |
|
|
|
| |
ALC MAX | This can be set when the sensitivity mode is set to ALC. | ISO400 | ||
|
| Used to set the maximum sensitivity of ALC, which auto- |
| |
|
| matically switches the sensitivity depending on the bright- |
| |
|
| ness. |
|
|
|
| [Variable range: ISO200, ISO400] |
| |
