LFREEZE button
While in the REC mode, press this button to capture a still image (freeze) of the im- ages being outputted through the MONI- TOR terminal. At the same time, the still image is saved to the main unit memory. Pressing this button once more will cancel the still image and return to the camera images.
Saving images to the main unit memory ( ☞ page 34)
MEMO
You can also set the unit to automatically can- cel the still image after 5 seconds.
FREEZE screen, CANCEL screen ( ☞ page 53)
MMONITOR output terminal (D-sub 15-pin, female)
Used to connect to a VGA monitor or SXGA compatible capture board.
The default setting is set to VGA monitor compatible.To change the setting from VGA mode to SXGA mode, change the dip switch settings.
Setting the monitor ( ☞ page 24)
●When in the SXGA mode, images of 1360 × 1024 pixles (7.5 frames/sec.) are
outputted.
●For the VGA mode, you can select be- tween the FINE mode of 640 × 480 pix-
els (7.5 frames/sec.) or DRAFT mode of
640 × 240 pixels (30 frames/sec.) in the menu screen.
Setting the VGA mode ( ☞ page 25)
NLENS connection terminal
Used to connect the lens cable.
Mounting the lens ( ☞ page 17)
OPOWER display lamp
This lamp lights when the power of the main unit is on.
PDC IN power input terminal
(Mini DIN 8-pin, female)
Main unit power supply (DC 12V) is sup- plied through this terminal.
For the power supply, use the
Connecting the power ( ☞ page 18)
QREMOTE terminal (Metal 10-pin, female)
Used to connect external devices such as a freeze switch or flash unit.
5. Various recording methods ( ☞ page 40)
RDip switches
Used to set the SCSI ID ( ☞ page 24) and monitor ( ☞ page 24), and output color bar ( ☞ page 28).
SSCSI terminal (Half-pitch 50-pin × 2)
Used to directly output to an MO drive ( ☞ page 20) or printer ( ☞ page 21).
The default setting of the SCSI ID is 7. Change the SCSI ID setting when connect- ing to a PC, etc.
Connecting to a PC ( ☞ page 64)
