Exposure screen, E48 | JVC KY-F70 specs

6. Menu screen settings (continued)

EXPOSURE screen

	Menu item	Function/variable range	Default value
IRIS MODE		Set depending on the used lens	ATUO
		AUTO: when using an auto-iris lens
		MANUAL: when using a manual iris lens or no lens

	AE LEVEL	Used to adjust the video level when using auto iris, ALC	0

@@ @ @ @ @and EEI.

Raise the level: increase the number

Lower the level: decrease the number

[Variable range: –128 ~ 127]

IRIS LEVEL

Used to set the iris level when the IRIS MODE is set to

128

MANUAL.

Open iris:

increase the number

Close iris: decrease the number

[Variable range: 0 ~ 255]

IRIS DETECT

Used to change the set value of the detection level during

NORMAL

auto iris.

NORMAL: normal position

PEAK:

detects the peak brightness level for better

view of highly bright objects.

AVG:

detects the average brightness for better view

of objects.

IRIS AREA

Used to set the detection area during auto iris. Set ac-

FULL

cording to the usage condition.

FULL

SQUARE

SPOT

CIRCLE

Detection area Detection area Detection area Detection area

MEMO

When selecting the detection area, the area is displayed on the screen.

E48

Image 48

JVC KY-F70 manual Exposure screen, E48

Contents

Illustration with optional lens attachment This instruction book is made from 100% recycled paper Safety Precautions Varning Table of Contents Characters and symbols used in this instruction book Memo Features Accessories and attachmentsIntroduction Line and patterns may appear distorted when recorded Phenomena unique to CCD Part names and their functions Front and bottom Rear E10 ModeVentilation hole This lamp lights when the power of the main unit is on E11Used to connect the lens cable Mounting the lens Explanation of terminals Remoter terminal Metal 10-pin, femaleE12 E13 For the power supply, always use the AA-P700 AC adapter Before recordingBasic system E14 E15 AC adapterMO disk drive Model name Adapter Install E16Screws Female Lens remote control Mounting the lensE17 Camera head Male Thread section Mount clamp ring Lens Connecting the power Clamp filter Attached power supply cableE18 AC adapter Connecting a monitor E19Monitor terminal Connecting an MO drive unit E20Scsi Do not set the ID of the MO drive side to other than Connecting a printer Dip switchesE21 Scsi Set the ID of the printer side to other than Mounting the camera Mounting methodChanging the camera mounting bracket position E22 Fall prevention wire chain 6mm Camera head Fall preventionE23 E24 Minal on the rear of the main unitSet to OFF Set to on Menu settings VGA mode settingsLens settings VGA mode and lens settings are made from the menu screen Time and date settings Time Adjust screenE26 Play menu screen E27 OK display screen Monitor adjustment Turn the main unit power on Adjust the video monitorSet using the main unit dip switches Monitor settings E28 Focus adjustment E29Press the Menu button to return to the normal screen White balance adjustment E30REC Menu screen Menu item Set value White Balance screen E31 Auto white in operationAuto white operation completed White shading adjustment E32REC Menu screen E33 Basic operations Recording images to the main unit memoryE34 Freeze display Returning to the REC mode Press the Mode button to enter the Play modePlaying back images from the memory E35 Saving images from the memory to an MO disk E36 Set to either the Freeze or Play mode Outputting images from the memory to a printerUse a printer with an Scsi input terminal E37 Clearing images from the memory E38Video Memory Clear E39 Memory cleared Various recording methods Recording a PC monitorE40 System Setting screen Outputting negative imagesE41 Timing chart Sxga mode Synchronizing flash and FreezeE42 High speed shutter only About ALC and EEI operations E43 Menu screen settings Menu screen flowE44 E45 Exposure screenFreeze screen Process screen Setting procedure REC normal menu screenE46 REC normal menu screen Menu item Set value About the submenu screens of the normal REC menu Play menu screenREC quick menu screen E47 Exposure screen E48 E49 E50 White Balance screen E51 Mode OFF E52Shading Level G Freeze screen Process 1/3 screenE53 @ADJUST set when changing the gamma curve E54Gamma Used to set whether the gamma curve to determine Process 2/3 screen E55Flare R Flare B E56 ColorMatrix Standard value System Setting screen E57 E58 Menu screen of the Play mode E59Send Prioryty Video ME.MORY REC mode quick menu screen E60Menu item Tor Sensitivity can be changed using the Level Submenu item Sensitivity can be changed when the sensitivity modeE61 Resetting settings Menu Reset screen SET buttonResetting E62 E63 Press the Menu once more to return to the normal screen Connecting to a PC Camera remote control softwareCompatible systems E64 Printer Flash Freeze switch E65AC adapter Analog RGB, WEN, Hs, Vs, RS-232C Specifications OthersE66 External dimensions unit mm E67Inch screw SL96172