JVC LPT0319-001A Automatic Satellite Programme Recording, Satellite Receiver Unit, Aerial

40ADVANCEDOPERATIONS(cont.)

Automatic Satellite Programme Recording

This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder's AV2 (L-2) IN/DECODER connector and programme the timer on the satellite receiver; the recorder starts recording when the signals input from the satellite receiver to the AV2 (L-2) IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.

Outdoor Unit

Satellite Cable

Satellite Receiver Unit

Mains outlet

S OUT

21-pin AV input connector (SCART)

Aerial	S-VIDEO IN	Back of TV
	connector
TV Aerial cable	Aerial
	connector

AUDIO IN connector

ANT. IN

RF OUT

S OUTSORTIE

AUDIO

OUT

SORTIE

PAUSE

TELEC.

		ANT. IN
	SYNCHRO EDIT	ANTENNE
IN/OUT	MONTAGE SYNCHRO	ENTREE
ENTREE/SORTIE	JLIP
AV1 (L-1)
	SAT CONTROL
IN/DECODER	CONTROLEUR SAT
ENTREE/DECODEUR		RF OUT
AV2 (L-2)
		ANTENNE
		SORTIE

Back of Recorder

IMPORTANT

When you set "L-2 SELECT" to "SAT" (☞ pg. 50), it is possible to view a satellite broadcast with the TV set to its AV mode even if the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the display panel.

●If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.

NOTE:

Refer to the instructions supplied with your satellite receiver.