Edit From Camcorder | JVC LPT0319-001A, HR-S8700EK guide

46ADVANCEDOPERATIONS(cont.)

Edit From

A Camcorder

You can use a camcorder as the source player and your video recorder as the recorder.

1	MAKE CONNECTIONS
	A If the camcorder has no S-VIDEO output connector...
	... connect the camcorder’s AUDIO/VIDEO OUT
	connectors to the recorder’s front panel AUDIO/
	VIDEO input connectors.
	B If the camcorder has an S-VIDEO output connector...
	... connect the camcorder’s S-VIDEO OUT and
	AUDIO OUT connectors to the recorder’s front
	panel S-VIDEO and AUDIO input connectors.

1

2

AUX

1

2

– –:– –

1 2 3

4

5

6

7 8 9

0

3

4

4

3

PR

● When using a monaural camcorder, connect its

AUDIO OUT connector to the AUDIO L input

connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the

recorder. Refer to the camcorder’s instruction manual

for operating procedure.

SET RECORDER’S INPUT MODE

Press AUX and/or PR to select "F-1" for the AUDIO/

VIDEO input connectors, or "S-1" for the AUDIO/

S-VIDEO input connectors, depending on the connec-

2 tors being used.

SET EDIT MODE

3 See "Picture Control" on page 45.

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

●When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish dubbing the tapes.

4	START CAMCORDER
	Engage its Play mode.
5	START RECORDER
	Engage its Record mode.

AIf the camcorder has no S-VIDEO output connector...

Recorder

BIf the camcorder has an S-VIDEO output connector...

Recorder

		To rear panel PAUSE
	AUDIO	connector
VIDEO	AUDIO
VIDEO	input
input	input
input

	To rear panel PAUSE
AUDIO input	connector
S-VIDEO
input

	Audio Cable (not provided)
	Video Cable (not provided)	Mini-Plug Cable
	AUDIO OUT	(not provided)
	AUDIO OUT	(JVC camcorder
		(JVC camcorder
		only)

Camcorder

VIDEO OUT

EDIT

Player

Audio Cable (not provided)

S-Video Cable (not provided)

S-VIDEO OUT

Camcorder

AUDIO OUT

EDIT

Player

Mini-Plug Cable (not provided) (JVC camcorder only)

Image 54

JVC LPT0319-001A, HR-S8700EK setup guide Edit From Camcorder

Contents

HR-S8700EK Safety Precautions Connection to the mains supply in the United Kingdom Moisture Condensation Do not place the recorder Some Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Connect Video Recorder to TV Back of TVBack of Recorder Mains outlet Mains Power Cord Video Connection Tion pg and the TV is turned on, Before performing the following procedure, make sure thatWith the AV or S-VIDEO connection Go to item Link screen will appear. Then the Guide Remote control while downloading is10 or If -- appears on the display panel, refer Program number set If auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failed Link Functions Access Main Menu ScreenAccess Mode SET Screen Turn on the Recorder Satellite Receiver Control Setting Check Result of Test Select Satellite RECEIVER’S Channel for TestingEnter Satellite RECEIVER’S Brand Code Find Programme Start Point PlaybackLoad a Cassette Start Playback Pause During Playback Activate HIGH-SPEED Search Recording Engage ITR Mode Select Preset to WatchReset Counter SET Counter Display Access Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode Number Timer Warning PDC Recording Start Time Express Timer ProgrammingEnter Programme Time SET Tape Speed SET PDC ModeTimer Mode Return to Normal Check, Cancel And Replace Programmes Confirm Overlapping Programmes When programmes overlap each otherCancel or Change Programme Setting Modify Navigation Turn OFF Navigation Check MemoryReturn to Normal Screen Turn Off Navigation Select Tape Number Access Find Blank Space ScreenTitle Editing Load a Cassette Edit Tape Title Access Video Navigation ScreenEnter Character Select Tape Number Select Programme Select CategoryEdit Programme Title Category Delete Tape Data Delete ProgrammeData Delete Programme Data Access Video Access Find Title ScreenAccess Tape NO. Screen Finding Title Select Programme Load a Cassette Access Date ScreenSelect Programme Access Category Screen Sorting By Date Navigation Check Memory Title Editing Access Main Menu Screen Select Programme Return to Normal Screen Finding Title Access Date Screen Override Automatic Tracking Playback Picture AdjustmentAdjust Tracking Manually Digital 3R SET ModeMode Video Stabilizer Selecting Sound You Want Access REC LevelAdjust Audio Control Screen During Playback Receiving Nicam Stereo And Bilingual ProgrammesSoundtrack Selection Type of Broadcast On-screen Display Being Received Skip Over Unwanted Looking For Scene You WantActivate Index Search Sections Select S-VHS Mode Recording According To Tape TypeSuper VHS S-VHS VHS ET and VHS Select B.E.S.T. Mode Playback/ Recording According To Tape Charac- teristicsS.T. Picture System Playback Start PlaybackRecording During B.E.S.T Satellite Receiver Unit Connector TV Aerial cable Audio in connectorAutomatic Satellite Programme Recording Aerial REC Mode Access Main Menu ScreenSelect L-2 Select Mode Screen SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY Power SET TV Brand Code Control Your TV Using Additional ButtonsTV Multi-Brand Remote Control Operate TV Operate Satellite Receiver Satellite Receiver Multi Brand Remote ControlBrand Code Number Control SET Mode Access Main MenuAccess Mode SET Minimizing Picture Degradation While Editing Edit From Camcorder Synchro Edit connector Lanc Cable not provided Synchro EditingPress Synchro /8again Repeat steps 4 6 as necessary Edit To Or From Another Video Recorder Input ModeSET Edit Mode SET Recording DECK’S Recorder Player OUTPUT/INPUT Setting SELECT/INPUT Setting Audio Dubbing Reset the Counter Insert EditingLocate END Point END Insert Editing Engage Insert EditingStart Editing Press Insert Access Jlip ID NO. SET Screen Terminal JLIPJoint Level Interface Protocol ConnectorAccess Initial SET Screen Information On J Terminal ON-SCREEN Display ENABLE/DISABLEOther Functions On-Screen Display Select Power Save Mode Power Save ModePress %Þ to move the highlight bar pointer to Auto SP→LP Timer Access Mode SET ScreenAuto Timer Next Function Memory Engage RECORD-PAUSE Mode Stop PlaybackResume Recording Connection To Stereo System Speaker Television Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video Channel Test Signal With RF Connection Auto Channel Set Tuner SetPerform Auto Channel SET Pointer to Auto CH View Confirmation Screen Enter NEW Channel Information Storing Channels ManuallyInput Channel Close Confirmation Screen Fine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastChange Station Preset Position Delete a Channel Enter NEW Character TV Station And ID List Station Name TV Station Channel Number Guide Clock Set Video Plus+ System Setup NumberGuide Program Number Set Questions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Won’t stop blinking Record Safety tab removed Recording Other Problems Index Front View Rear View Display Panel VCR Remote Control TV Muting Button mutes sound Remote Control LCD Fast Forward FF Button same as button on Maximum recording time DA4 Double Azimuth helical