JVC LPT0319-001A Video Plus+ Timer Programming, Access Video PLUS+ Screen, Enter Pluscode Number

18BASICOPERATIONS(cont.)

VIDEO Plus+®

Timer

Programming

Before performing the VIDEO Plus+ Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

LCD panel

With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

ACCESS VIDEO PLUS+ SCREEN

1	Press PROG.		VIDEO PLUS+
		[0 – 9] = VIDEO PLUS+
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER PLUSCODE NUMBER

Press the NUMBER keys to	VIDEO PLUS+
enter the PlusCode
	1 2 3 4 5 6 7 8
2 number of the programme
you wish to record, then
press OK.

LCD PROG

NUMBER

PDC

PROG

1		– –:– –
2
1	2	3
	DAILY	WEEKLY

4 5 6

7 8 9

0

1

2

3

4

4

SP/LP

3OK

●If you make a mistake,

press and input the	[0 – 9] =
	[ ] : DELETE
correct number.	[PROG] : EXIT

The PlusCode number you enter appears on the front display panel:

The display panel shows only a 4-digit number.

ACCESS VIDEO PLUS+ PROGRAM SCREEN

You can use the remote control with LCD panel to enter the PlusCode number.

1	ACCESS VIDEO PLUS+ DISPLAY
	Press LCD PROG.
	The LCD panel looks like this:
2	ENTER PLUSCODE NUMBER
	Press the NUMBER keys to enter the PlusCode number of
	a programme you wish to record, then press .

●If you make a mistake, press and input the correct number.

The PlusCode number you enter appears on the LCD panel:

Then go to step 3 in the right column.

	The VIDEO Plus+ Program				– P1 –
	screen appears (if you’re			VIDEO PLUS+ 123456789
3 just starting out, “P1”				START		STOP
			21:00		= 22:00
	appears).			SP	VPS/PDC OFF
	The display panel shows the			DATE		TV PROG
	programme start time.		25.12		1
	Pressing	changes the				BBC 1
	display to the programme			: OK
	stop time, then the date and
	preset position.
				SP

IMPORTANT

Make sure the preset position number you wish to record is displayed; if not, see "VIDEO Plus+® System Setup" on page 70 and set the Guide Program number for that PlusCode number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid PlusCode number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 19.