JVC LPT0319-001A Remote Control Functions, Remove Power Supply, SET Remote Control Code

42ADVANCEDOPERATIONS(cont.)

Remote

Control

Functions

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

1

2

REMOVE POWER SUPPLY

Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL CODE

Press and hold VCR on the remote control for over 2 seconds, press the NUMBER key "2" and then press OK.

VCR

NUMBER "1"

1

2

		– –:– –
1	2	3
4	5	6
7	8	9
	0

3

4

4

3

4

RE-SUPPLY POWER

Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

Press on the remote control. The recorder will now only respond to B code signals.

1 3

2

OK

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.