16
BASIC
OPERATIONS
(cont.)
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
4,5
PLAY
1
TV signals being received by the recorder’s
1 | LOAD A CASSETTE |
Insert a cassette with the record safety tab intact (See below). | |
| |
● The counter is reset to 0:00:00 and the recorder | |
power comes on automatically. | |
| ● While "– – – |
| the tape will run for a few seconds to search for the |
| tape number. |
CHOOSE A PROGRAMME |
Press PR +/– or the NUMBER keys to select the preset |
2 you wish to record. |
6
STOP/EJECT | – |
| PR+/ |
2
SP/LP/EP
3
RECORD
4
PAUSE
5
| SET TAPE SPEED | |
| Press SP/LP/EP ( | ). Check the SP/LP/EP indicator on |
| the recorder display panel to confirm the selected tape | |
3 speed. |
| |
| ● In EP mode, the recording time is extended three times. | |
| ● If you record a programme in EP mode on this | |
| recorder, it is recommended that you play back the | |
| ||
| ● Picture quality of LP/EP recordings will not be as high | |
| as on SP recordings. | |
|
| |
| START RECORDING | |
1 | – | TV/VCR |
|
|
Press and hold RECORD and press PLAY on the remote |
| 2 |
|
|
2 | 1 | 2 | 3 |
|
|
|
NUMBER | 4 | 5 | 6 |
|
|
| |
| 7 | 8 | 9 |
|
| 0 |
|
| 1 |
|
|
4,5 | 2 |
|
|
6 | LAY |
|
|
TOP |
|
| |
|
|
|
4 RECORD
3
4
4
SP/LP/EP 3
3
PR+/– 2
PAUSE 5
4 | control, or press RECORD on the recorder. |
B.E.S.T. takes place at the beginning of both the | |
| first SP and the first LP (or EP) recording after |
| inserting the cassette (☞ pg. 38). |
| If "DIRECT REC" is set to "ON", the programme |
| that appears on the TV screen will be recorded |
| (☞ pg. 11). (Only with a TV offering |
| ● You can not change the preset whilst recording is in |
| progress. To change the preset, see step 5. |
5 | PAUSE/RESUME RECORDING |
Press PAUSE. Press PLAY to resume recording. | |
● During the Record Pause mode, you can change the | |
preset by pressing the PR +/– buttons or the NUMBER | |
| keys. |
| STOP RECORDING |
| Press STOP on the remote control or STOP/EJECT on |
6 the recorder. Then press STOP/EJECT to remove the | |
INFORMATION
When using the AV connection (☞ pg. 6), you can switch between TV mode and AV mode by pressing TV/VCR.
*Depending on the type of TV used, TV/VCR button does not function as described above.
Recording Resume Function
If there is a power cut during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.
cassette. |
Accidental erasure prevention
●To prevent accidental recording on a
recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.
Record safety tab
