JVC HR-S8700EK, LPT0319-001A setup guide Display Panel, Vcr

77

DISPLAY PANEL

1	2	3	4	5 6	7
+8
4					SP
0
6		VPS/PDC
15dB
		VCR
NORM
8	9	0 ! @		#	$

1B.E.S.T. Picture System Display lights from bottom to top while B.E.S.T. is active. ☞ pg. 38 Audio Level Indicator displays audio input and

output levels. ☞ pg. 34

2Programme Time Indicators show the programme start time () and the programme

stop time () for timer-recording. ☞ pg. 20

3Symbolic Mode Indicators

	STILL:
PLAY:	SLOW:
FF/REW VARIABLE	RECORD:
SEARCH:
	RECORD PAUSE:
AUDIO DUBBING:

AUDIO DUBBING PAUSE:

INSERT:

INSERT PAUSE:

AV INSERT:

AV INSERT PAUSE:

4"Timer" Indicator lights when ä has been

pressed to engage Timer mode. ☞ pg. 19, 21

5S-VHS Indicator lights when a cassette marked S-VHS is inserted with S-VHS mode set to "ON", when an S-VHS-recorded tape or S-VHS ET- recorded tape is played back, or when S-VHS ET

mode is engaged. ☞ pg. 37

6Channel Display shows preset position where the station currently being received is stored. Clock Display shows current time. ☞ pg. 10

7Tape Speed Indicators display mode of record-

ing; light during Record or Play mode. ☞ pg. 16

8Audio Mode Indicator displays audio output

mode currently selected. ☞ pg. 35

9Tape Remaining Time Indicator displays time remaining on tape when certain buttons are

pressed. ☞ pg. 17

0"Cassette Loaded" Mark lights once a cassette is inserted; remains lit until cassette ejected.

!PDC Indicator lights when PDC has been engaged for timer recording. ☞ pg. 19, 21

*VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this recorder.

@VCR Indicator lights when the video recorder is in the video mode. At this point, the TV auto-

matically enters AV mode. ☞ pg. 14

#Counter shows time elapsed since playback or recording began. (The counter can display up to +/– "19:59:59". If the playback or recording time exceeds this limit, the display starts to count from "0:00:00".)

With displayed, shows time remaining from current tape position to end of tape (☞ pg. 17). Counter, Preset Position*, Clock and Tape Remaining Time Display appear alternately when – –:– – (Display) is pressed.

*Preset Position is not displayed during playback. $ Mode shows external input mode selected (L-1,

L-2, SAT*, F-1 or S-1).

*When "L-2 SELECT" is set to "SAT" (☞ pg. 50), "SAT" appears instead of "L-2".