JVC LPT0319-001A, HR-S8700EK setup guide Connect Video Recorder to TV, Back of TV, Back of Recorder

6

QUICKSETUPGUIDE(cont.)

STEP

2

INSTALLATION

CONNECT VIDEO RECORDER TO TV

Place the recorder on a stable, flat surface.

Back of TV

Aerial connector

21-pin AV input connector (SCART)

Mains Power

Cord

Mains outlet

RF Cable (provided)

21-pin SCART Cable (not provided)

Make this connec- tion if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.

S OUTSORTIE

AUDIO AV1 (L-1)

OUT

SORTIE

AV2 (L-2)

PAUSE

TELEC.

TV Aerial Cable (not provided)

		ANT. IN
	SYNCHRO EDIT	ANTENNE
	MONTAGE SYNCHRO	ENTREE
IN/OUT
ENTREE/SORTIE	JLIP
	SAT CONTROL
IN/DECODER	CONTROLEUR SAT
ENTREE/DECODEUR		RF OUT
		ANTENNE
		SORTIE

Back of Recorder

RF CONNECTION

To connect to a TV with NO 21-pin AV input connector (SCART) . . .

1– Disconnect the TV aerial cable from the TV.

2– Connect the TV aerial cable to the ANT. IN jack on the rear panel of the recorder.

3– Connect the provided RF cable between the RF OUT jack on the rear panel of the recorder and the TV’s aerial connector.

AV CONNECTION

To connect to a TV with 21-pin AV input connector (SCART) . . .

1– Connect the aerial, recorder and TV as per “RF CONNECTION”. 2– Connect an optional SCART cable between the AV1 (L-1) IN/ OUT socket on the rear panel of the recorder and the TV’s 21-

pin AV input connector (SCART).

NOTES:

●The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV's 21-pin AV input connector (SCART) is compatible with the Y/C signal, set "L-1 OUTPUT" to "S-VIDEO" after the connection and the initial settings are completed (☞ pg. 50). You can obtain high-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV's SCART connector.

●For switching the TV's mode, refer to the instruction manual of your television.

●To obtain high-quality S-VHS pictures, you can also use the S-VIDEO CONNECTION described on page 7.

ATTENTION

■Do NOT Plug the mains power cord into a mains outlet until all connections are completed.

■Do NOT press the button on the recorder or on the remote control to turn on the recorder's power before you start the Auto Set Up procedure described on page 8.