Version 1.08 (04/07)

Manual: CMOS Industrial Camera LOGLUX® i5

⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

Operation of the complete LOGLUX® i5 CL SET camera system

System requirements

The following host system (PC/IPC) requirements must be met for a safe and proper operation of the complete LOGLUX® i5 CL SET camera system:

Minimum desktop PC system

Optimum desktop PC system

Portable PC system

 

 

(notebook)

Pentium® III or Athlon™

Pentium® III/IV or Athlon™XP

Pentium® III/IV or Athlon™XP

processor >1.0GHz

processor >2.0GHz

mobile processor >2.0GHz

256MB PC133

512MB PC400

512MB PC400

>20GB hard disk with 1MB

2x80GB hard disk with 2MB

>40GB hard disk with 2MB

cache

cache in RAID0 mode

cache

Motherboard with UDMA133-IDE

Motherboard with RAID

-

interface

controller and FireWire™

 

 

interface

 

PCI/AGP graphics card with

PCI/AGP graphics card with

Separate graphics solution with

nVidia®400 or Radeon™7000

nVidia®440 or Radeon™9200

nVidia®nForce2 or Radeon™

chipset

chipset

mobility chipset

Min. 1 vacant PCI slot

Min. 1 vacant PCI slot

PCMCIA / FireWire™ interface

CRT monitor or LC display with

CRT monitor or LC display with

LC display with min. contrast of

min. contrast of 1:250

min. contrast of 1:500

1:250

Operating system MS Windows®

Operating system MS Windows®

Operating system MS Windows®

2000/XP

2000/XP

2000/XP

The system requirements for IPC systems are similar to those for desktop PC systems; for reasons of the 'tougher' use conditions, more exclusive components may occasionally have to be chosen. For configuring an IPC system, just contact a systems house of your choice.

With the exception of the real-time recording of large image data streams (e.g. AVI captures in full frame and at full frame rate), normal operation of the camera will be basically possible also with a minimum host system configuration, however, some difficulties might occur.

In view of the numerous existing PC/IPC system configurations it is impossible to guarantee that the full scope of camera system functions can be used in every configuration. In any case, a sound basis of a successful start-up and trouble-free operation is a minimally equipped host system (only the graphics and framegrabber cards are installed) that meets the above-mentioned requirements and has a newly installed operating system.

Installation of the CameraLink™ PC plug-in card MATRIX Vision MVtitan-CL

The type MVtitan-CL CameraLink™ PC plug-in card is a universally applicable and powerful framegrabbing card for any application. Its main components are an integral image processor (TM1300), a large memory for the software and data (8MB standard, optional: <=32MB), and two plug connectors for two base and one medium CameraLink™ ports.

Please consult the manufacturer's manual when installing the PC plug-in card.

Note: You need to have administrator

 

rights for the respective PC if you want to

 

install hardware or software components!

Figure 7 : MATRIX Vision MVtitan-CL PC plug-in card

Page 10 of 46

KAMERA WERK DRESDEN GmbH