Manual: CMOS Industrial Camera LOGLUX® i5

Version 1.08 (04/07)

⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

The user profile parameters

The 'Region of Interest' profile menu

This menu is used for adjusting the image region (on the sensor) which is of interest to the user (region of interest), and for directly setting the maximum possible frame readout rate by means of the parameters X_Size (width of the ROI) and Y_Size (height of the ROI) since sensor pixels are scanned in the specified region only (progressive scan).

The horizontal image geometry parameters 'distance of ROI from left' and 'width of the ROI' are set in the 'Left' and 'Width' fields, respectively. The associated scroll bars can also be used for a coarse pre-adjustment. Only integer values may be set.

The vertical image geometry parameters 'distance of ROI from top' and 'height of the ROI' are set in the 'Top' and 'Height' fields, respectively. The associated scroll bars can also be used for a coarse pre-adjustment.

The maximum possible values of 'distance of ROI from left' and 'distance of ROI from top' are limited by the parameter settings 'width of the ROI' and 'height of the ROI'.

The graphic 'ROI position' display gives an indication of the position and size of the ROI set relative to the full CMOS sensor area.

Figure 13 : The 'Region of Interest' profile menu

KAMERA WERK DRESDEN GmbH

Page 17 of 46