Manual: CMOS Industrial Camera LOGLUX® i5

Version 1.08 (04/07)

⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

MCU firmware update

When updating the MCU firmware, the contents of file LOGLUXi5CL_xxx.txt (with xxx standing for the current version) in the user-specific source directory must be transferred to the camera.

∙Select the ‚Firmware‘ profile menu.

∙Activate the ‚Advanced Features‘ option.

∙Click button ‚Update‘ in panel ‚MCU Firmware‘.

∙Highlight the MCU firmware file LOGLUXi5CL_xxx.txt in the user-specific source directory (Windows® standard dialog) and acknowledge ⇒ the update will start, and the data are transferred to the camera.

∙Upon the completion of the update, either click ‚Disconnect‘ or continue operating the camera if desired.

FPGA firmware update

When updating the FPGA firmware, the contents of file LOGLUXi5CL_xxx.bin (with xxx standing for the current version) in the user-specific source directory must be transferred to the camera.

∙Select the ‚Firmware‘ profile menu.

∙Activate the ‚Advanced Features‘ option.

∙Click button ‚Update‘ in panel ‚FPGA Firmware'.

∙Highlight the FPGA firmware file LOGLUXi5CL_xxx.bin in the user-

specific source directory (Windows® standard dialog) and acknowledge ⇒ the update will start, and the data are transferred to the camera.

∙Upon the completion of the update, either click ‚Disconnect‘ or continue operating the camera if desired.

Updating the LOGLUX® LuxWare software

A new version of the PC software may be installed without any problems in the directory containing the old version.

If the newer version is installed in a different directory, the INI file should be copied from the installation directory of the old version to that of the new version. It is advisable to save this INI file to another storage medium, e.g. a floppy disc.

KAMERA WERK DRESDEN GmbH

Page 43 of 46