Version 1.08 (04/07) | Manual: CMOS Industrial Camera LOGLUX® i5 |
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Introduction
This manual describes the installation and functions of the CMOS industrial camera LOGLUX® i5 CL made by KAMERA WERK DRESDEN GmbH, as well as the software and hardware components which are additionally required for a camera system.
The below chapters will enable the user to operate a camera system including a CMOS industrial
camera LOGLUX® i5 CL, and to fully exploit the camera functions by applying the supplied LOGLUX® LuxWare configuration tool. Furthermore, the commands referred to herein permit the ambitious programmer to configure the camera at CMOS sensor register level by means of the integral terminal.
Note: This manual was drawn up with utmost care. However, since the unit is constantly being improved, no guaranty can be given that the information is complete and correct at any time. We have made great efforts to provide you with a perfect product but in view of the numerous computer configurations it is impossible to guarantee that your computer or your application works
We cannot guarantee that a specific application purpose is served. Within the framework of the statutory regulations, any liability for direct damage, indirect damage and
This manual is protected by copyright. All rights created thereby, in particular the right to translate, reprint or lecture, to use figures or tables, to broadcast, microfilm or reproduce the contents or parts thereof in any other way or to store it partly or wholly in data processing systems, are reserved. Also in individual cases, the manual or parts thereof are permitted to be reproduced only within the scope of the Copyright Act of the Federal Republic of Germany of September 9, 1965 as amended. As a rule, a fee is charged for any reproduction. Violations are subject to the penal provisions of the Copyright Act.
Copyright © KAMERA WERK DRESDEN GmbH 2004
Even if no express reference is made thereto, the use or reproduction of model or trade names mentioned in this manual does not justify the assumption that such names are free names within the meaning of the trademark and proprietary rights that could be used by everyone.
Wherever direct or indirect reference is made in this manual to acts, regulations or standards (e.g. DIN, VDI, VDE), KAMERA WERK DRESDEN GmbH cannot guarantee that they are correct and
| Phone (0351) | 2806 0 |
| Fax (0351) | 2806 392 |
Page 4 of 46 | KAMERA WERK DRESDEN GmbH |