Manual: CMOS Industrial Camera LOGLUX® i5

Version 1.08 (04/07)

⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

The 'Camera globals' menu

This menu is used for renaming the selected camera, setting the communication speed, selecting the camera profile, and displaying two camera temperature values.

The user can change the name of the selected camera in the 'Camera Name' input field. All upper-case and lower-case letters and numerals as well as the separating character '_' are available. The new name will be valid, and the respective entry in the tree structure updated, immediately upon leaving the input field. The camera name may have up to 32 digit positions.

The 'Baudrate' option allows the communication speed to be set. Once set, the speed will be immediately available. It should be noted that a baud rate of '9600' only is available when the camera is configured via the CameraLink™ interface.

Under 'Active Profile', the user can select the camera profile to be used from four different, factory-set camera configurations. Selectable are all profiles visible in the tree structure.

The currently used profile is displayed in the tree structure with a preceding green arrow. The 'Temperature' status field displays the temperature measured at the sensor in the camera.

Figure 11 : The 'Camera globals' menu

KAMERA WERK DRESDEN GmbH

Page 15 of 46