Version 1.08 (04/07)

Manual: CMOS Industrial Camera LOGLUX® i5

⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

The 'Look-up Table x' menu

This menu is used for loading one of the three user-specific look-up tables in the camera to the host system, and loading, or saving, user-specific look-up tables (LUT) from the host system (PC/IPC) to the camera.

The user can enter the desired LUT name in the 'Name' field. All upper-case and lower-case letters and numerals as well as the separating character '_' are available for the purpose.

The buttons under 'Actions' allow the user to choose from the following LUT functions:

∙ Read → The selected LUT is transferred from the camera to the host system (PC/IPC), and the function values are displayed under 'Lookup table contents'. By clicking button 'Save', the transferred LUT can be saved as a text file in the host system (PC/IPC).

∙ Load → A LUT (text file) in the host system is selected to be transferred to the camera. When the button is pressed, the standard

Windows® dialog 'Load LUT from ...' is opened, and the user can choose the desired file (in the

.TXT format). Clicking the 'Write' button transfers the selected LUT to the camera.

∙ Save / Write → A LUT transferred from the camera is saved as a text file in the host system LUT ('Save'), or a LUT is transferred from the host system (PC/IPC) to the camera ('Write'). When clicking 'Save', the standard

Windows® dialog 'Save LUT to ...' is opened, and the user can name the desired .TXT file.

Note that the inscription and function of the 'Save/Write' button will not be visible and active, respectively, until the 'Read' or 'Load' button is pressed.

Figure 20 : The 'Look-up table x' menu

Page 24 of 46

KAMERA WERK DRESDEN GmbH