(_ Mark for placement of buttonhole
_) Starting point
@ Slider
There should be no gap.
_t_Spring holder
(_ Difference
[] Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the needle
to the starting point.
Then lower the automatic buttonhole foot.
Sew slowly and stop the machine at the starting point
when a buttonhole is completed.
[] Remove the fabric and place a pin just before the
bartack at each end, to prevent cutting bartacks. Cut the
opening with the buttonhole opener.
[] To sew another buttonhole, you must reset the machine.
Reset byshifting the stitch selector ineither direction,
_) or@), to the next setting. Then shift the selector back
to the buttonhole setting "_]".
[] When finished, push the buttonhole lever up as far as it
will go.
S[]
s[]
f-[]
s
/
/
/
J
Y
\
J
J
78