Manual Buttonhole
_1_Stitch selector: _] (BH)
Stitch width: 3 to 6.5
Stitch length: 0.25 to 1.0
Needle thread tension: 2 to 6
Presser foot B: Buttonhole foot
• To sew
If the diameter of the buttonis more than 1.0" (2.5 cm), a
buttonhole must be made manually as follows:
[] Turn the handwheel toward you to raise the needle to
its highest position. Raise the presser foot.
[] Set the stitch at" _]" byturning the stitch selector.
[] Attach the buttonhole foot [ B] .
[] Pull the buttonhole lever downward as far as it will go.
[]Lower the needle into the garment where the buttonhole
is to start, and lower the foot.
[] Sew the front bartack and left row, then stop.
[] Click the buttonhole lever toward you.
S
S
l_ WEDTH
_LENGTH (_
® ®
i
i
J
J
[] Sew the back bartack and right row, then stop the
machine at the starting point.
Tocut the opening and to reset for sewing the next
buttonhole, refer toinstructions [] and [] on
page 78.
[]
J
J
84