Kenmore 385.161302 owner manual Topstitching, Quilting

Topstitching

_) Stitch	selector:	6 to 8
Stitch	width:	0
Stitch	length:	Red zone
Needle thread tension:		2 to 6
(_ Presser foot A:		Zigzag	foot
Presser foot H:		Straight	foot

NOTE:

When using the straight stitch foot, make sure to use the center needle position, otherwise the needle may strike the presser foot and possibly break.

Topstitching emphasizes lines of garments and keeps seams and edges flat and crisp. Accent suits or blouses with one or two rows of topstitching around the outer edges of cuffs, lapels or collars. Lower the presser foot and keep the edge of the fabric next to the right edge of the presser foot.

Evenly guide the fabric along the edge to produce an even row of topstitching 318" (I .0 cm) from the edge.

Quilting

(_	Stitch	selector:	6 to 8
(_	Stitch	width:	0
	Stitch	length:	Red zone
(_ Needle thread tension:			2 to 6
	Presser foot A:		Zigzag	foot
(_ Presser foot H:			Straight	foot
	NOTE:

When using the straight stitch foot, make sure to use the center needle position, otherwise the needle may strike the presser foot and possibly break.

Use the seam guide lines on the needle plate, and the free- arm, to help determine the distance between quilting stitches. The quilter will help keep the stitching line straight. [] Loosen the quilter holding screw.

Slide the quilter in the hole to the desired width and tighten the screw.

[] Sew, guiding the quilter over the previous row of stitching.

_1_Quilter holding screw Quilter

_3_Hole

(_ Distance

F-

I	I	I	_}	_ WIDTH
I	I	I
,Io,I,4			_	LENGTH ®
	®		®	®
				or

o ou

J

S

Y

F-

I I I

I I I

4°4, 4

_ LENG11-I [_

®®

or

o

ou

J

F-

J

4O