Kenmore 790.99613 Setting Oven Controls Consumer Defined Control Features

Setting Oven Controls
Consumer Defined Control Features
Setting Temperature Display -- Fahrenheit or Celsius
The BROIL _and FLEX CLEAN _pads control the Fahrenheit orCelsius temperature display modes, The
v
oven controlcan be programmed to display temperatures in Fahrenheit or Celsius, The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell ifthe display is set for Fahrenheit or Celsius press
(Figure 1)and hold for7 seconds; "550°'' willappear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display isset to show
temperatures in Celsius (Figure 3).
2. Press _ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press _ to accept the change or press @ to reject the
change.
PRESS DISPLAY
Q
for 7seconds Figure 1
18
Figure 2
Figure 3