Self-Cleaning INSTRUCTIONS

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stopor interrupta self-cleaning cycle
due to excessive smoke or firein the oven:

PRESS

1. Press @.
2. Once the oven has cooled down for approximately 1 HOUR
and the "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened (Figure 1).
Note: Self-Clean cycle can never be set to start more than 12 hours in advance.
®
DISPLAY
Adjusting Oven Temperature
The temperature inthe oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven iscooking
too hot or too cool for thetemperature you select, you can adjust the actual oven
temperature to be more or lessthan what is displayed. Before adjusting, test a recipe
by using a temperature setting that is higher or lower than the recommended
temperature. The baking results should help you to decide how much of anadjustment
is needed.
INSTRUCTIONS PRESS

To adjust the oven temperature higher

1. Press _ for 6 seconds (Figure 2).
v
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) Q Q (Figure 3). The Q Q
temperature may be increased as much as 35°F (19°C).
3. Press _ to accept the temperature change and the display _ or
will return to the time of day (Figure 4). Press @ to reject the @
A
change if necessary.

To adjust the oven temperature lower

1, Press _for 6 seconds, 0° will appear in the display (Figure 5).
v
2, To decrease the temperature use the number pads to enter the
3,
Q
desired change. (Example -30°F) Q Q and then press @ Q Q @
(Figure 6). The temperature may be decreased as much as 35°F
(19°C).
Press (_ to accept the temperature change and the display _ or
A
willreturn to the time of day (Figure 7). Press @ to reject the
change if necessary.
Figure 1
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
36
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7