RECALL AND CHANGE OF SETTINGS
To Recall a Setting
To recall (check) a setting before you start the oven, follow the directions below.
®To check the Setting for a given stage, touch MEMORY/RECALL once or more until the correct
Stage Light and Indicator Light turn on. The set Time, Temperature or Oven Temperature for that stage will show in the display window.
•To check the Microwave Cooking Power level, touch MICRO POWER.
® To check the Oven Temperature, touch OVEN TEMP/PREHEAT.
To recall (check) a setting while the oven is operating, follow the directions below.
®To check settings while the oven is operating, touch the desired pad to recall the setting for the operating stage.
o To recall a future stage, touch STOP, follow the directions above for recalling (checking) a setting before starting the oven, and then touch START to continue cooking.
e To recall TIME OF DAY while the oven is running, touch TIME OF DAY. It will show momentarily in the display window.
To Change | a Setting |
|
|
|
|
|
|
| |
Recall the | Setting | to be changed by following directions | above and make the change | as follows: | |||||
TIME |
|
| Touch "0" until | only | one | "0" shows in | |||
(MICRO TIME, | CONVEC TIME, MICRO/CONVEC | TIME) | the | Display | Window. | Set | Cooking | ||
|
|
|
| Time. |
|
|
|
| |
TEMPERATURE | CONTROL |
| Set | Cooking | Probe | Temperature. | |||
(MICRO TEMP, CONVEC TEMP, MICRO/CONVEC TEMP) |
|
|
|
|
|
| |||
MICRO | POWER |
| Set | Microwave | Cooking | Power Level° | |||
|
|
|
| To reset to "HI", set "99". | |||||
OVEN | TEMP/PREHEAT |
| Set | Oven Temperature. |
|
PAUSE BETWEEN STAGES
Some recipes require placing or removing of ceramic tray, stirring, turning and adding or removing of foods between stages. To set the oven to stop between stages, touch PAUSE rather than MEMORY/RECALL when setting the oven. If pause is set, the oven will automatically stop.
After the pause, to restart the oven, touch START.
REGULAR TIMER
Your Oven also has a timer that can be used for
For detailed insturctions on using this timer, see below.
To use the Ragular Timer feature:
I. Touch CLEAR.
2.Touch MICRO TIME.
3.Touch numbers for the time.
4.Touch MICRO POWER.
5.Touch "0" (power level 0)
6.Touch START. The time will begin counting down in the display window with no cooking or heating in the oven.
A tone will sound and the word "End" will show in the display window for 2 seconds when the time is
over.
13