J!
MULTI-STAGE COOKING
can be set for three memory stages when Programmed Defrost is included as the first stage. The stages are set before cooking and will sequence automatically when oven is started.
I. Touch CLEAR.
2.Touch MICRO TIME or MICRO TEMP. The lights
above TIME or TEMP and MICRO, below COOK I will go on. The display window will show "0" or "F'.
. Touch the correct numbers for the time or temp- erature of the first cooking stage.
o Touch MICRO POWER. The lights above MICRO
and below COOK I will go on. The display window will show "HI".
. Touch the correct numbers for the cooking power level of the first cooking stage (if other than "HI").
EXAMPLE: In preparing a cake mix, the cookbook calls for a first stage of 7 minutes at the "50 (SIMMER)" power level followed by a second stage of 3 minutes at "HI". The following steps explain how to set the oven:
First Stage (7 minutes: power level 50 SIMMER)
I. Touch CLEAR.
2.Touch MICRO TIME.
3.Set 7 minutes by touching "7," "0" and "0." "700" will show in
the display window.
. Touch MEMORY/RECALL or PAUSE. The light
below COOK 2 will go on. The display window will show "0".
. Touch MICRO TIME or MICRO TEMP.
8.Touch the correct numbers for the time or temp- erature of the second cooking stage.
. Touch MICRO POWER. The display window will show "HI".
10.Touch the correct numbers for the cooking power level in the second cooking stage (if other than "HI").
11.Touch START.
PROGRAMMED DEFROST
If you want to cook after using the Programmed Defrost, before setting the above
Programmed Defrost and touch MEMORY/RECALL, then follow the above instructions numbered 2_11. See
Pages 20 through 24 for the detailed instructions of Programmed Defrost. The cooking process can be set up to three stages when PROGRAMMED DEFROST is one of the stages.
®To pause between stages
To set the oven to stop between stages, touch PAUSE
when setting the oven. See Page 13 for more detailed directions.
NOTE: If you touch MEMORY/RECALL instead of PAUSE, the oven will not stop but will remember the next stage and continue working.
4.Touch MICRO POWER.
"HI" will show in the display window to remind you that the oven will operate at highest power unless you enter a lower power setting.
. .Touch numbers "5" and "0." "50" will show in the display window (indicating that you have set the oven to operate at
power level 50).f-S-7_ The first stage has been set.
_E]C_E_E_i
C]E] G_2 [Z_E]
25