Kenmore 87561 manual Temperature Controlled, CAUTION: Do not

TEMPERATURE CONTROLLED

"HI-POWER"/"MULTI-POWER" COOKING AND AUTOMATIC "HOLD WARM"

The "Temperature Controlled Meat Cooking Guide" and "Reheating Guide" on Pages 17 and 18 will show you

which multi-power setting and temperature setting are recommended for the food you are cookng. When cooking with the temperature control settings, the timer is not used.

I. Place the temperature probe into the food with the first inch of the

sensor in the center of the food. The probe should be in a

level direction or on an angle as shown. It should NOT be put in from

the top.

2. Plug the temperature
probe into the	socket on
the side of the	oven.
CAUTION: Do not
plug the pointed end of
the temperature	probe
into the socket.

-_. , ,"___

a°"

When you touch "7" and "0" the display window will show "70". This means that in the "70

(ROAST)" setting, the oven is at power level 70.

NOTE: You do not need to touch MICRO POWER when you are cooking with HI (max power). To set "HI-POWER" Cooking, skip steps 6 and 7 above.

However, if MICRO POWER is touched, the light above MICRO will go on and the word "HI" will show

in the display window. This is to tell you that the oven will work at HI (highest microwave power) unless a different power setting is chosen.

3. Touch	CLEAR.
4. Touch	MICRO		TEMP.
The lights above TEMP and
MICRO, below COOK I will
go on, and "F" will show in
the display		window.
5. Choose the food temperature
and touch		the	corresponding
numbers.		For	example, if the
recipe calls for doneness at
165 ° F, you would touch
numbers "i .... 6" and "5".
When you touch "165", the
display	window		will show
"165F".	If the		temperature
probe is not plugged into the
socket, the word "Prob" will
flash and the oven will not

work. _ F-_7 F-_-I

6. Touch MICRO		POWER.
The word "HI" will show in
the display window until you
enter a lower power setting.
This is to remind you that the
oven will always operate at full
power unless you set a lower
power.
7. Choose the power control
setting you desire and touch
the corresponding		numbers.
For example, if the recipe
should call for	cooking		at the
"70 (ROAST)"	setting,		you
would touch numbers "7" and

CE3C}E3UK3

......... F-_-7

CBE3_U_

C_3_CK3 _UK3

8.Touch START. The oven will _Z3 begin to cook and you will be

able to see the temperature of the food rising in the display window.

. A tone will sound for one

second when the temperature is reached. The oven will switch into "Hold Warm" to keep the food warm.

The micro control setting auto- matically changes to "power

level I". The display window will show "Hold".

I0. To be sure the correct tempe-

rature is being held, you may touch MICRO TEMP.

The "holding" temperature

will show in the display window.

The "Hold Warm" will continue for 60 minutes after the food reaches the chosen temperature or until the door has been opened or until STOP has been touched. If the door has been opened,

the "Hold Warm" will stop. To reset, simply touch MICRO TEMP, the corresponding numbers and START.

NOTE: The highest temperature that can be set is 185° F.

_E]UE]CE3 CK3F-_CE] F-_TUK3UK3

_ F-07 _

"0". _F-_

19