7Execution
7Press the TIMER key on the re-
mote repeatedly until the pro- gram number to be executed ("PROG.1" or "PROG.2" or "PROG.12") is lit.
Program No. lit
1
EX. BASS T U N E R
8Press the POWER key to switch the power off to the STANDBY mode.
The STANDBY/TIMER indicator lights in green.
The program timer is activated and re- cording will start when the set ON time comes.
To cancel program timer :
Press the TIMER key on the remote re- peatedly until "PROG.1" or "PROG.2" or "PROG.12" turns off.
To check or change the timer setting :
Restart the procedure from step 1 again.
÷Be sure to adjust the time of the day (page 7) before using the timer functions.
÷PROG.1 and PROG.2 should be set so that their operating periods do not overlap. Leave at least 1 minute of interval between the two programs.
÷The speakers do not output audio during timer recording.
÷Even when the program timer is canceled, previously made setting is stored in memory and remains until new timer information is set the next time.
÷When the STANDBY/TIMER indicator is blinking in green, the timer setting or clock setting is erroneous. Check and correct them as required (pages 7 & 58).
section | Application |
Timer |
|