Kenwood MDX-G3 Before applying power, Safety precautions, 2 EN, Factory fitted moulded mains plug

Models: MDX-G3

1 72
Download 72 pages 28.1 Kb
Page 2
Image 2
Before applying power

Before applying power

Units are designed for operation as follows.Caution : Read this page carefully to ensure safe operation.

Units are designed for operation as follows.

U.S.A. and Canada

AC 120 V only

Australia

AC 240 V only

Europe and U.K

AC 230 V only

For the United Kingdom

Factory fitted moulded mains plug

China and Russia

.......................... AC 220 V only

Other countries

AC 110 - 120 / 220 - 240 V

 

switchable

1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse.

2.The fuse cover must be refitted when replacing the fuse in the moulded plug.

3.Do not cut off the mains plug from this equip- ment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent con- nection to the mains supply.

IMPORTANT: The wires in the mains lead are col- oured in accordance with the following code:

Blue : Neutral

Brown : Live

Do not connect those leads to the earth terminal of a three-pin plug.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SER- VICEABLE PARTS INSIDE. REFER SERVICING TO QUALI- FIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTI- TUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

The marking of products using lasers (Except for some areas)

CLASS 1

LASER PRODUCT

CAUTION

INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.

The marking is located on the rear panel and says this product has been classified as Class

1.It means that there is no danger of hazard- ous radiation outside the product

Inside this laser product, a laser diode classi- fied as Class 3B laser radiation is contained as alerted by the internal caution label shown above. To avoid exposure to laser beams, do not open the cover.

2 EN

Page 2
Image 2
Kenwood MDX-G3 Before applying power, Safety precautions, 2 EN, Factory fitted moulded mains plug, For the United Kingdom