Kenwood MDX-G3 instruction manual EX. Bass W a i t 7 4 m i n, 35 EN

High-speed recording the CD track being played (Single-track recording)

(1)Perform the operations in steps 1 to 4 (page 34).

(2)Play the CD track to be recorded.

(3)Press the MD O.T.E. key on the re- mote.

When you are operating the main unit, see step 4 of "Recording CD onto MD" (page 21).

Recording starts after returning to the beginning of the current track.

To stop recording in the middle :

Press the 7STOP key.

÷Be careful not to turn power off or apply shock or vibrations to the system while "MD WRITING" is displayed.

÷Once high-speed recording of "CD=MD HIGH" is started, it is not permitted to record the same CD by high-speed recording within 74 minutes after the start of previous high- speed recording. In case this restriction is applied, the display shows the time until the next high-speed recording becomes possi- ble.

EX. BASS W a i t 7 4 m i n .

Time until re-recording is available

It is also prohibited to continue high-speed of more than 100 tracks within 74 minutes.

÷If you want to record the same CD again in less than 74 minutes, set "REC SPEED" to "CD=MD NORM" and perform the MD O.T.E. recording (pages 20 & 21).

section	Application
Recording

35 EN