Kenwood MDX-G3 instruction manual Regard to track numbers at the time of recording, 37 EN

In regard to track numbers at the time of recording

MD track numbers are used to search the beginning of a track or programming tracks.

÷When recording audio from the radio, tape or AUX source, track numbers are assigned automatically in any of the fol- lowing cases.

–When audio is input after a no-sound period of more than about 3 seconds. (However, the track number may not be incremented in case the music source recorded contain noise, etc.)

–When pianissimo, or low-level sections have continued during recording of classic music, etc.

–When the MD 6 or MD REC key is pressed in record-pause mode to resume recording.

–When the TRACK EDIT key on the re- mote is pressed during recording.

÷When recording the digital output from CD, track numbers are assigned auto- matically in any of the following cases.

–When the CD track changes.

–When the MD 6 or MD REC key is pressed in record-pause mode to resume recording.

–When the TRACK EDIT key on the re- mote is pressed during recording.

section	Application
Recording

37 EN