22
• Make sure the raised-blade side of
the disc is positioned face up on the
common adapter.
• If using the adjustable slicing blade,
make sure it is set to the correct
thickness.

Clutch engages

Lid won’t close when using a disc

Food Processor attachment not shredding or slicing properly

Food Processor attachment doesn’t run

If the clutch activates, there will be a very loud clicking noise.
1. Check to make sure there are not too
many items in the Food Processor
attachment.
2. Make sure any hard seeds are removed.

Stand Mixer motor slows down

This is normal operation and is not damaging to the performance of the attachment.
• Check to see whether the Stand Mixer
is plugged into a grounded 3 prong outlet.
If it is, check the fuse or circuit breaker
on the electrical circuit the Stand Mixer
is connected to and make sure the circuit
is closed.
• Is the fuse in the circuit to the Stand Mixer
in working order? If you have a circuit
breaker box, be sure the circuit is closed.
• Unplug the Stand Mixer, then plug it back
into the outlet.
• Check to make sure the Food Processor
attachment was assembled correctly, and
the interlock lid is properly aligned and
locked in place.
• Make sure the disc is installed correctly, and
is positioned properly on the disc adapter.
If the problem is not due to the above item,
see the “Warranty and Service” section.
• Make sure ingredients are suitable
for slicing or shredding. See “Tips for
Great Results” section.
Do not return the Food Processor attachment
to the retailer. Retailers do not provide
service.
TROUBLESHOOTING WARRANTY AND SERVICE
W10641290A_ENv13.indd 22 5/28/14 4:32 PM