5-7
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
PUSHBUTTON SWITCH ASSEMBLY
Refer to page 4-5 for the procedure for servic-
ing the pushbutton switch assembly.
1. Unplug ice maker or disconnect power.
2. Set the ohmmeter to the R x 1 scale.
OFF ON CLEAN
POWER
Yellow (Y) White/Black (W/BK)
Black (BK)
1/4"
Black (BK)
1/8"
3. Disconnect the four wire connectors from
the pushbutton switch assembly.
4. Touch the ohmmeter test leads to the test
points shown in the chart below. The meter
reading should indicate as shown.
Switch Position Test Point Reading
Y - BK (1/4″) Open (infinite)
W/BK - BK (1/8″) Open (infinite)
Y - BK (1/4″) Closed (0 Ω)
W/BK - BK (1/8″) Open (infinite)
Y - BK (1/4″) Closed (0 Ω)
W/BK - BK (1/8″) Closed (0 Ω)
OFF
ON
CLEAN