4-11

REMOVING THE EVAPORATOR
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
1. Unplug ice maker or disconnect power.
2. Open the ice maker door.
3. Remove the ice from the storage bin.
4. Remove the cutter grid and the evaporator
thermistor from the unit (see pages 4-2
and 4-3 for the procedures).
5. Disconnect the bin thermistor connector
from the bottom of the control housing
(see page 4-2).
6. Remove the top door screw from the ice
maker door, and pull the door off the
bottom hinge.
7. Remove the two 5/16″ hex-head screws
from the top hinge and remove the hinge.
Hinge Screws
8. Remove the two front and two rear screws
from the cabinet top.
2 Hex-Head Screws
Screw Screw
9. Lift the cabinet top and position it forward
on top of the unit.
Top Door Screw
Continued on the next page.