23.Carefully vacuum the areas between the lamps (both upper and lower), then use a Staticide wipe to thoroughly clean the glass dust plate between the lamps.
24. Clean the imaging guides thoroughly with a Staticide wipe.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the MSDS for more information.
25.Reinstall the upper and lower imaging guides. Handle the imaging guides carefully as to not put fingerprints on the guides.
26.Close the pod.
27.Reinstall the output tray.
28. Power on the scanner.
