Adjusting the side guides and end stop

Maximum Document Size: 30.5 x 86 cm (12 x 34 in.). Documents larger than 43 cm (17 in.) require operator assistance.

NOTE: The maximum document size for the i700 Series Scanners is 40 inches (1016 mm).

Paper inks: All inks on the paper must be dry before scanning is

started. This includes: Standard offset printing, Inkjet printer, Thermal transfer, Handwriting inks.

Correction Fluids: Liquid Paper®, Tipp-Ex®, Wite-out®, and other similar correction fluids.

Feeder Capacity: The elevator tray can hold up to 500 sheets of 75 g/m2 (20 lb.) paper.

To accommodate multiple applications with variable feeding requirements, the side guides can be adjusted for right-, left- or center- edge feeding. The side guides can be moved together or independently to achieve offset feeding.

1.Pull the side guides all the way out and then push them together (toward the center) to reset or center them.

End stop

Side guides

2.Open the side guides slightly wider than the documents you will be feeding.

3.Adjust the output tray end stop to slightly longer than the longest document being fed in a batch.

4.Place the documents in the elevator tray.

5.Adjust the side guides to fit the documents.

3-4

A-61500 May 2010

Page 20
Image 20
Kodak 6J7611A manual Adjusting the side guides and end stop