Continuous feeding
Manual feeding
Continuous feeding can be used when you want to scan small batches of documents (less than 25).
When the scanner is configured for continuous feeding, the elevator tray is raised to a position where approximately 25 documents can be loaded. The elevator tray will remain in this position to allow more documents to be loaded to the bottom of the stack.
To continuously feed documents, follow Steps 1 through 5 above. As the documents are being scanned, you can continuously add a batch of documents to the bottom of the stack.
NOTE: Depending on how your scanner is configured, the transport will stop when the Transport Timeout has been reached.
To manually feed documents:
1.Position the document you want to feed in the elevator tray so that the paper present sensor is covered.
