User precautions

Users and their employer need to observe the common sense

 

precautions applicable to the operation of any machinery. These

 

include, but are not limited to, the following:

 

The scanner weighs 38.6 kg (85 lbs). Use appropriate precautions

 

 

when relocating the scanner.

 

Do not wear loose clothing, unbuttoned sleeves, etc.

 

• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.

 

Hair length should be kept short, using a hair net if needed, or tying

 

 

long hair up in a bundle.

 

• Remove all other loose objects from the area that could be drawn into

 

 

the machine.

 

Take sufficient breaks to maintain mental alertness.

 

Supervisors should review their practices and make compliance with

 

these precautions a part of the job description for operation of the

 

scanner or any mechanical device.

Gas springs warning

If the gas springs exhibit a sign of decayed performance, call Service

 

for replacement. Do not attempt to repair.

Environmental information

EMC statements

United States

The Kodak i600/i700 Series Scanners contain lead in the circuit board solder. Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or, in the USA, visit the Electronics Industry Alliance website: www.eiae.org.

The product packaging is recyclable.

The i600/i700 Series Scanners are Energy Star compliant and are shipped from the factory with the default time set to 15 minutes.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequently energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Japan

This is a Class A product based on the standard of the Voluntary

 

Control Council for interference by information Technology Equipment

 

(VCCI). If this equipment is used in a domestic environment, radio

 

disturbance may arise. When such trouble occurs, the user may be

 

required to take corrective action.

1-6

A-61500 May 2010

Page 9
Image 9
Kodak 6J7611A manual EMC statements, User precautions, Gas springs warning, United States, Japan